Ariens Snow Blower Hoses and Tubes

Ariens Snow Blower Breather Tube

Ariens Snow Blower Fuel Hose Kit 1/4-318mm

Ariens Snow Blower Tube 4.10/3.50-6 Tr87

Ariens Snow Blower Ftg-lube .25-28x.256 Ywzc This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a threaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

Ariens Snow Blower Breather Tube (291/369/414cc)

Ariens Snow Blower Fuel Hose Kit- Qty 3 W/clamps

Ariens Snow Blower Pipe Plug

Ariens Snow Blower Pipe Plug- 1/4 Npt

Ariens Snow Blower Tube- Axle

Ariens Snow Blower Nipple