Ariens Lawn Tractor Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Ariens Lawn Tractor Parts
Your Price
$3.99
In Stock
Ariens Lawn Tractor Cap Axle Black 1 50 x 1 00
PartSelect Number PS9007667
Manufacturer Part Number 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage.
This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Your Price
$4.99
In Stock
Ariens Lawn Tractor Shear Bolt
PartSelect Number PS9002923
Manufacturer Part Number 51001500
This OEM-verified shear bolt, measuring 2-1/8 inches in length and 5/16 inches in diameter, is designed to break under excessive force to protect your lawn equipment by absorbing the impact. Specifically, it allows the augers of your machine to stop while the shaft and gear case continue to rotate. To check if the shear bolt is broken, inspect it for fractures or missing pieces. You might notice that the shaft of your machine is rotating normally but the augers are not moving with it. It is important to address a damaged shear bolt promptly to avoid costly repairs or equipment failure. To remove the shear bolt from your machine, use a wrench or socket to turn it counterclockwise. As this replacement part is sold individually, it is strongly recommended that you keep spare bolts on hand in the event that they break.
Installation Instructions
Dennis from WESTFIELD, MA
Switch return spring broken
Removed panel, unsrew switch assy. Remove electric connector s, reverse process to reinstall
Read more...
Your Price
$37.30
In Stock
Ariens Lawn Tractor Friction Wheel
PartSelect Number PS17016657
Manufacturer Part Number 09475300
The Friction Wheel is part of the clutch assembly, which helps to drive your unit. If broken from being worn down, you will have drivability problems and should replace the part. This part is metal with a rubber outer ring, and comes in white/black. Installation will require a wrench set, socket set, and pliers and is rated as "Medium" difficulty by customers. Refer to your make, model and diagram to check if this is the right part for you.
Fixes these symptoms
- Drive system does not work
- See more...
Your Price
$3.99
In Stock
Ariens Lawn Tractor Ring Klip Number T5304-75
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Your Price
$8.71
In Stock
Ariens Lawn Tractor Bolt and Washer Assembly
PartSelect Number PS9020856
Manufacturer Part Number 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
Installation Instructions
Robert from WHITMAN, MA
the head blew a vaulve guide destoying push rods
about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine
Read more...
Your Price
$8.27
In Stock
Ariens Lawn Tractor Aluminum Push Rod
PartSelect Number PS9073139
Manufacturer Part Number 690982
This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and will need to be replaced before your engine runs at full capacity. This push rod is approximately 6 inches in length, and is an OEM part sourced directly from the manufacturer.
Your Price
$3.99
In Stock
Ariens Lawn Tractor Washer 25/32 x 1-1/4 x 16 Ga.
PartSelect Number PS9008998
Manufacturer Part Number 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number to confirm this is the washer you need for your equipment.
This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Installation Instructions
Frederick from BINGHAMTON, NY
Your Price
$4.99
In Stock
Your Price
$6.89
On Order
Ariens Lawn Tractor Rod-Push (Steel)
PartSelect Number PS9062983
Manufacturer Part Number 690981
This is a replacement steel push rod for your lawn tractor engine. The engine will have two push rods; one made of steel, and one made of aluminum. This part is made of steel and is approximately 6 inches in length. Make sure you order the correct replacement rod, as they are different. If the engine is unable to operate at full power, you may have a bent or broken push rod. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Engine misfires
- See more...
Installation Instructions
Robert from WHITMAN, MA
the head blew a vaulve guide destoying push rods
about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine
Read more...
Your Price
$27.50
In Stock
Ariens Lawn Tractor Gear-Governor
PartSelect Number PS9151758
Manufacturer Part Number 793338
Installation Instructions
rodney from MUSCATINE, IA
governor not working
Had to pull the engine off the rider mower. Drained the oil took shield off the flywheel. Set it upside down on a 5 gal bucket. Took a 7/16 hand wrench to remove governor lever from bottom of engine. Left it in its location. Pulled 10 1/2 " bolts. Split engine case. Found the old governor had broke into pieces. Had to use a magnet to remove all the pieces. Removed the small clip and removed gear. Lubed shaft slid new on put new clip on. Lined governor weights with center piece tapped it in place very lightly. Cleaned gasket flanges pulled the shaft seal. Used the old seal as a seal driver. When putting the cover back on make sure the seal dont roll out. Take a mini screwdriver and tuck it in around shaft. Put bolts back in and tighten like instructions
Read more...
Ariens Lawn Tractor Appliance Types
Related Ariens Lawn Tractor Parts
- Lawn Tractor Bearings
- Lawn Tractor Belts
- Lawn Tractor Blades
- Lawn Tractor Brackets and Flanges
- Lawn Tractor Caps and Lids
- Lawn Tractor Carburetors
- Lawn Tractor Deflectors and Chutes
- Lawn Tractor Dipsticks
- Lawn Tractor Engines
- Lawn Tractor Fans and Blowers
- Lawn Tractor Filters
- Lawn Tractor Fuses
- Lawn Tractor Gears
- Lawn Tractor Grilles and Kickplates
- Lawn Tractor Handles
- Lawn Tractor Hardware
- Lawn Tractor Hinges
- Lawn Tractor Hoses and Tubes
- Lawn Tractor Ignitions
- Lawn Tractor Knobs
- Lawn Tractor Latches
- Lawn Tractor Lights and Bulbs
- Lawn Tractor Manuals and Literature
- Lawn Tractor Panels
- Lawn Tractor Pedals
- Lawn Tractor Pulleys
- Lawn Tractor Seals and Gaskets
- Lawn Tractor Seats
- Lawn Tractor Spark Plugs
- Lawn Tractor Spindles
- Lawn Tractor Springs and Shock Absorbers
- Lawn Tractor Starters
- Lawn Tractor Switches
- Lawn Tractor Tanks and Containers
- Lawn Tractor Transmissions and Clutches
- Lawn Tractor Valves
- Lawn Tractor Wheels and Rollers
- Lawn Tractor Wire Plugs and Connectors
Popular Ariens Lawn Tractor Models
Below are the most popular Ariens Lawn Tractor models we have. Enter your model number in the search box to find your model.
- 936056 46-Inch Hydro Tractor
- 936056 46-Inch Hydro Tractor
- 936056 Hydro Tractor 46" Lawn Tractor
- 936056 46-Inch Hydro Tractor
- 936056 46-Inch Hydro Tractor
- 927046 RM1028E 10hp 28" Lawn Tractor
- 915159 Zoom 42
- 915159 Zoom 42
- 915159 Zoom 42
- 915159
- 915159
- 931033 (000101) 18hp Garden Tractor
- 931033 18hp Garden Tractor
- 931033 GT 18hp Lawn Tractor
- 931033 18hp Garden Tractor
- 93604200 Front-Engine Lawn Tractor
- 936085 46-Inch Automatic Tractor
- 936085 46-Inch Automatic Tractor
- 96016002701 Front-Engine Lawn Tractor
- 936053 46-Inch Hydro Tractor
