Whirlpool Blender Hardware

Your Price

$7.47

Whirlpool Blender Washer Screw

PartSelect Number PS11751637

Manufacturer Part Number WPW10273971

Installation Instructions

Gerard from E FALMOUTH, MA

Door handle broken

I followed the instructions you already have in
your information. I had no problem using them
for my fix. Delivery of parts arrived very quickly
and there was no down time for the dryer. Read more...

Your Price

$7.47

Whirlpool Blender Dishwasher Screw 818 X 5/8

★★★★★

1 Review

PartSelect Number PS11747050

Manufacturer Part Number WP9741232

Sold individually.

Fixes these symptoms

Leaking
Not cleaning dishes properly
See more...

Installation Instructions

Charles from Brooklyn, NY

Water leaking out under door

The pump outlet gasket was sticking out and a screw was missing from the pump outlet housing. This was causing water to flood out under the door.

Once I removed the pump outlet housing I saw that the gasket was out of place almost all the way around. I cleaned around the housing, replaced the gasket and the missing screw.

You need a Torx T-15 for this repair. Note that all of the screws on the housing were loose so you might need to tighten them from time to time.

Be careful not to drip a screw when you are installing it since it's a real hassle to fish it out from under the screen.

Once everything was tightened up, the wash pressure seemed to be much higher. Read more...

Your Price

$8.55

Whirlpool Blender Screw

PartSelect Number PS11741603

Manufacturer Part Number WP3400814

Sold individually.

Installation Instructions

Michael from Tomahawk, WI

Gears ground when roller attachment applied.

Took screw off band. This revealed 4 screws to upper housing. Removed 4 screws and lifted upper housing off . To my surprise I found no screws holding gear housing cover in place. You could tell they were there at one time. Should be 4. I removed cover disasembled what was left of gears. Cleaned old grease ordered parts. Thought since there was only 1 screw on diagram it would ship 4. No big deal. After recieving parts further inspection revealed no screws holding motor in place. This blows me away. Anyway off to local hardware store for more screws. Got home slapped it togethere in 10 minutes. Ordered this off TV about 6 years ago. They must have had it in for repair and forgot to put it back together. All that aside it runs better than ever. Thanks much Michael Read more...