Toro Chainsaw Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Toro Chainsaw Hoses and Tubes
Your Price
$20.73
In Stock
Toro Chainsaw Hose: Breather
PartSelect Number PS9927774
Manufacturer Part Number 2432689-S
The breather hose acts as a valve for the fuel tank, it allows for the air to enter the fuel tank but it won't allow fuel or fuel emissions to leave the tank. It is an identical replacement for a worn, damaged or a missing component that was installed on a new unit. This is a genuine OEM sourced replacement part which is designed for use with Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is made of high-quality rubber material and is sold individually. Check the diagrams for your model to ensure the correct repair procedure.
Your Price
$16.54
On Order
Toro Chainsaw Line-fuel
PartSelect Number PS9140673
Manufacturer Part Number 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.
Your Price
$32.09
In Stock
Toro Chainsaw Connector-hose
PartSelect Number PS9167523
Manufacturer Part Number 95-3270
This is a genuine replacement part that has been OEM sourced to ensure a high level of quality. The hose connector is intended to be used with riding lawnmowers. This item attaches to the cleanout fitting on the mower's deck assembly. This item is used to attach a garden hose when cleaning the inside of the deck. The hose connector is sold as an individual replacement part.
Your Price
$9.35
In Stock
Your Price
$10.60
In Stock
Toro Chainsaw Hose-vacuum
PartSelect Number PS9306672
Manufacturer Part Number 791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.
Your Price
$21.94
In Stock
Your Price
$6.40
In Stock
Your Price
$13.41
Special Order
Your Price
$37.74
In Stock
Toro Chainsaw Fuel Line
PartSelect Number PS10007099
Manufacturer Part Number 740017B
The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle and crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.
Your Price
$27.70
In Stock
Toro Chainsaw Tube-inner (w/valve)
PartSelect Number PS9164354
Manufacturer Part Number 93-4244
This is an authentic Toro replacement part. The inner tube is designed by the manufacturer for use in lawn tractors and riding mowers. This part is made of inflatable rubber, and includes the attached inflation valve. It is placed inside the wheel and tire assembly to provide a smoother ride. You may require a screwdriver when replacing this part. This item is sold individually.
Related Toro Chainsaw Parts
- Toro Chainsaw Bearings
- Toro Chainsaw Belts
- Toro Chainsaw Blades
- Toro Chainsaw Brackets and Flanges
- Toro Chainsaw Caps and Lids
- Toro Chainsaw Carburetors
- Toro Chainsaw Deflectors and Chutes
- Toro Chainsaw Dipsticks
- Toro Chainsaw Elements and Burners
- Toro Chainsaw Engines
- Toro Chainsaw Fans and Blowers
- Toro Chainsaw Filters
- Toro Chainsaw Gears
- Toro Chainsaw Handles
- Toro Chainsaw Hardware
- Toro Chainsaw Hinges
- Toro Chainsaw Knobs
- Toro Chainsaw Latches
- Toro Chainsaw Lights and Bulbs
- Toro Chainsaw Panels
- Toro Chainsaw Pulleys
- Toro Chainsaw Pumps
- Toro Chainsaw Seals and Gaskets
- Toro Chainsaw Seats
- Toro Chainsaw Springs and Shock Absorbers
- Toro Chainsaw Switches
- Toro Chainsaw Thermostats
- Toro Chainsaw Transmissions and Clutches
- Toro Chainsaw Valves
- Toro Chainsaw Wheels and Rollers