Tiller Exhausts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Tiller Exhausts
Your Price
$6.40
In Stock
Tiller Spark Arrester Screen
PartSelect Number PS8867212
Manufacturer Part Number 14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of this screen is to prevent flammable debris from entering the engine and becomes worn through regular use. If the screen is clogged, remove the screen from the muffler, hold it with pliers, and use a torch to burn off the debris before reinstalling the screen.
This part needs to be replaced when it becomes damaged or worn. When the screen is malfunctioning, you may notice debris exiting through the muffler. To complete this repair, you will need a screwdriver and pliers. This screen is located within the muffler; refer to your owner's manual for the exact location on your model.
Customers rated this repair as Easy.
Your Price
$49.98
In Stock
Tiller Muffler
PartSelect Number PS9294908
Manufacturer Part Number 693593
The purpose of a muffler is to soften the noise coming from the engine. It is an authentic replacement part that is sourced directly from original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Please note this high quality item is sold individually.
Installation Instructions
Philip from LINEVILLE, AL
Needed to replace muffler
Using a socket wrench with extension and a T20 star socket (you can use the appropriate hex head socket also) i removed to two bolts holding the muffler on. They are right on top of the engine and very accessible. Your model may have a heat shield that needs to be removed. Once the muffler is off remove the old gasket. It may be stuck to the muffler or exhaust opening on the engine. It should just pry of with a little effort. I did make sure there were no gasket pieces left behind. I placed the bolts through the flange of the new muffler and then slid the new gasket over the bolts. You can use a exhaust gasket sealant just hold it place while you place the flange in place and not have to worry about gasket dropping off. I just held it until I got the flange in place. I started the bolts by hand using the socket and extension. I alternated from each bolt until I had tighted it down. You can look up torque specs. I just used my grunt meter. It is good as new. Parts were OEM replacement. Not knock off almost right parts. I got very lucky when I found this company and will use them again.
Read more...
Your Price
$15.52
In Stock
Your Price
$22.21
In Stock
Your Price
$15.76
In Stock
Tiller Deflector-muffler
PartSelect Number PS9138598
Manufacturer Part Number 796956
This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during the replacement of this item. It may become broken and will need to be replaced. This is an authentic Briggs & Stratton and Toro replacement part that is sourced from the original manufacturer for use with engines, snowthrowers, tillers, lawn mowers, and lawn tractors.
Your Price
$11.98
In Stock
Tiller Deflector-muffler
PartSelect Number PS8960984
Manufacturer Part Number 393760
This is a genuine Briggs & Stratton and Toro replacement part for use in engines, lawn mowers, and lawn tractors. The muffler deflector is made out of metal. A wrench may be needed during the replacement of this item. It will need to be replaced if it breaks. This item is sold individually.
Your Price
$117.67
In Stock
Tiller Muffler
PartSelect Number PS9910813
Manufacturer Part Number 18310-ZF1-000
This is a genuine item that is supplied by the original equipment manufacturer for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. The purpose of a muffler is to reduce the noise from the engine's exhaust. Over time it may wear out or get clogged eventually requiring a replacement to ensure peak performance. It is a high-quality metal body component which is sold individually. Please note the hardware to secure it is sold separately.
Your Price
$27.98
In Stock
Tiller Muffler
PartSelect Number PS9281342
Manufacturer Part Number 494585
This is a genuine replacement part manufactured for use with small engines. The muffler assembly is complete including the adapters, the gasket, and mounting hardware. The exhaust muffler is sold individually.
Your Price
$140.19
Special Order
Tiller Muffler - Arrester
PartSelect Number PS9910819
Manufacturer Part Number 18310-ZH8-810
The arrester muffler attaches to the spark arrester and is made of metal. This item is available as an individual replacement. This is a Honda replacement part directly sourced from the manufacturer for use in engines. A screwdriver might be needed during the installation process. Over time this part may break and will need to be replaced.
Your Price
$6.78
In Stock