SprayTECH Paint Sprayer Hoses and Tubes

SprayTECH Paint Sprayer Suction Tube Assembly-straight This suction tube is compatible with various makes and models of airless paint sprayers and is sold as an individual OEM part. It draws paint from the container/reservoir and delivers it to the sprayer for application. This tube has a built-in filter attached, to prevent dust, dirt, or debris from entering the sprayer system. When suction tubes become clogged/blocked, damaged, or lose their suction, they can become inoperable and will lose any and all function. It is recommended that you regularly inspect the tube for damage or clogs, and if you notice your sprayer leaking from connection points around the tube or inconsistent spray patterns and suction ability, the tube is likely needing replacement. To replace this tube within your paint sprayer assembly, disconnect your sprayer from power and relieve the pressure within the sprayer. Drain all paint from the sprayer and paint reservoir to avoid mess. Remove the old suction tube by unscrewing it and/or any securing hardware, and then install the new tube with the same process as before. With the new tube installed, perform a test run with the sprayer to ensure the suction tube works properly before using it normally.

SprayTECH Paint Sprayer Return Tube Fitting This is an OEM part sourced directly from the manufacturer. The return tube fitting is commonly found in paint sprayers from Titan, SprayTECH, and Wagner. This part is made of high-quality plastic, and is attached to the pump assembly to connect the return tube. You may require pliers when replacing this item. This product is provided as an individual replacement part.

SprayTECH Paint Sprayer Long Check Valve Tube This is a genuine OEM sourced part that is specially designed for use with SprayTECH and Titan sprayers. It is the tube that connects to the check valve. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality long check valve tube is made of durable rubber material and is sold as an individual item. Refer to the owner's manual and the diagrams for your model to ensure the correct repair procedure.

SprayTECH Paint Sprayer Fluid Hose

SprayTECH Paint Sprayer Return Hose

SprayTECH Paint Sprayer Handle Tube This is an original part from SprayTECH. The metal handle tube is made for use with several spray gun models. This item is fitted into the spray handle, assisting with sending paint through the nozzle. The handle tube is sold individually. A wrench is helpful in making the removal and replacement.

SprayTECH Paint Sprayer Return Hose

SprayTECH Paint Sprayer Aircoat Tip, 4-in Fan Width

SprayTECH Paint Sprayer Outlet Fitting

SprayTECH Paint Sprayer Hose, Wireless, 25' X 1/4"