EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Pressure Washer Ignitions

Popular Pressure Washer Ignitions

Your Price
$62.60
  In Stock
Pressure Washer Armature-magneto
PartSelect Number PS9278124
Manufacturer Part Number 397358
This magneto, also known as an ignition coil, is a genuine OEM replacement part for outdoor power equipment. It generates the spark needed to ignite the air-fuel mixture in the engine’s combustion chamber, ensuring smooth and reliable operation. Over time, the magneto may fail due to worn wiring, damage to the spark plug lead, or incorrect gapping between the coil and flywheel. Symptoms of a faulty magneto include misfiring, hard starting, and poor performance. Installation involves removing the spark plug for safety, accessing the flywheel, and setting the correct gap with a feeler gauge before securing the new part.
Fixes these symptoms
Installation Instructions
Thomas from ALFRED, ME
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective, Read more...
Your Price
$66.77
  On Order
Pressure Washer Armature-magneto
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9044018
Manufacturer Part Number 590454
This genuine replacement magneto is designed for Briggs & Stratton engines used in Toro lawn mowers. It plays a vital role in the ignition system by generating the electrical current needed to fire the spark plug. Made from high-quality materials, this part is sold individually. Note: The spark plug boot is sold separately. To replace the magneto, begin by removing the housing or covers from your mower. Next, remove the spark plug and bind the cylinder to prevent it from turning. Disconnect the ignition wires and remove the old ignition coil. Install the new magneto, carefully setting the correct air gap between the coil and the flywheel. Once installed, reassemble the unit and test for proper operation. A screwdriver set is recommended for this repair.
Fixes these symptoms
Your Price
$58.66
  In Stock
Pressure Washer Coil Assy., Ignition
PartSelect Number PS9874896
Manufacturer Part Number 0J35220153
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most common reason for replacing the ignition coil is if the engine won't start and the coil proves to be at fault. This part is sold individually. The tools that you will need to replace the ignition coil is a flat-head screwdriver, nut driver and a socket wrench.
Installation Instructions
Stanton from PHILPOT, KY
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the magnetic section of the flywheel to secure the proper gap.

Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read more...
Your Price
$18.45
  Special Order
Pressure Washer Ignition Coil
PartSelect Number PS11898193
Manufacturer Part Number 30400-Z300110-0000
This is a genuine OEM supplied replacement part that is specially designed for Homelite and Ryobi generators and pressure washers. The ignition coil also is known as armature-magneto provides current for the ignition system by producing pulses of high voltage electricity for the spark plugs. While there are various reasons for ignition module failure, the primary symptoms usually manifest in the form of extreme difficulty starting your equipment, and eventually, a no-start condition. It is made of high-quality metal with rubber insulated cord and it is sold individually.
Your Price
$233.35
  In Stock
Pressure Washer Ignition Coil Assy
PartSelect Number PS10137379
Manufacturer Part Number 850-0191
This is a genuine OEM sourced replacement part which is specially designed for use with Mi-T-M industrial hot waters. The ignition coil also is known as an armature-magneto which provides the current for the ignition system by producing pulses of high voltage for the spark plugs. Over time the components will wear out and may begin to fail eventually requiring a replacement. Please note it is made of high-quality metal with rubber insulated wires and is sold individually.
Your Price
$21.58
  In Stock
Pressure Washer Ignition Coil Assembly
PartSelect Number PS18782195
Manufacturer Part Number 099981174003
Your Price
$18.24
  On Order
Pressure Washer Ignition Coil Assembly
PartSelect Number PS18781981
Manufacturer Part Number 099981133065
Your Price
$24.16
  In Stock
Pressure Washer Ignition Coil
PartSelect Number PS9873302
Manufacturer Part Number 099980425089
This is a genuine OEM supplied replacement part that is specially designed for use with Homelite pressure washers. The ignition coil which is also known as armature-magneto provides current for the ignition system by producing pulses of high voltage electricity for the spark plugs. While there are various reasons for ignition module failure, the primary symptoms usually manifest in the form of extreme difficulty starting your equipment, and eventually, a no-start condition. It is made of high-quality metal with rubber insulated cord and is sold as an individual item. A screwdriver might be needed to perform this repair. Refer to the diagrams for your model to ensure the proper replacement procedure.
Your Price
$62.60
  In Stock
Pressure Washer Armature-magneto
★★★★★
★★★★★
1 Review
PartSelect Number PS9035906
Manufacturer Part Number 591420
This replacement armature-magneto is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is an authentic part sourced directly from original equipment manufacturer. The armature-magneto also known as an ignition module produces pulses of high voltage for the spark plugs. This item includes (1) armature-magneto and (1) lead wire per order. To complete this repair you will need screwdriver set.
Your Price
$42.49
  Special Order
Pressure Washer Coil Assy., Ignition
PartSelect Number PS12622957
Manufacturer Part Number 0J35240143