Pressure Cooker Valves

Pressure Cooker Pressure Regulator This part comes directly from Presto. The Regulator maintains the proper pressure in many canners and pressure cookers. This part is regulates the pressure to 15lbs per square inch. When the pressure reaches 15lbs the regulator starts to gently rock. This part is made of stainless steel and has a plastic handle. This part should be replaced if it no longer sits correctly on the Vent Pipe (part number 01058). No tools are needed to replace this part.

Pressure Cooker Pressure Canner Regul This is a genuine OEM sourced part used on many pressure canning devices. The pressure canner pressure regulator is constructed of high-quality metal, and includes two 5 pound rings and the regulator body. This item manages the pressure amount in the canner. No tools should be required for making the installation. The pressure canner pressure regulator is sold individually.

Pressure Cooker Regul This part comes directly from the manufacturer. This Regulator is used on many models of Presto pressure cookers. The Regulator helps to maintain an even pressure while food is cooking. This part should fit loosely on the vent pipe and will start to rock when pressure inside the pot reached 15lbs PSI. The Regulator should be replaced when the handle has come off or when it no longer fits correctly on the vent pipe.

Pressure Cooker Pressure Reg Assy (09502)

Pressure Cooker Pressure Reg Assy

Pressure Cooker Pressure Canner Regulator Kit This is a genuine manufacturer-sourced part which is specially designed for use with Presto pressure canners. The regulator is an important component which helps to maintain needed pressure in the canner. Over time it may wear out and begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct repair procedure. Keep in mind this high-quality pressure canner regulator kit includes the regulator, the stem, and the instruction manual.

Pressure Cooker Safety Valve Kit This is a factory original part. The Safety Valve is used on many models of pressure cookers. The Valve includes a gasket and retaining nut. This Valve is designed to open and relieve excess pressure safely. This Valve should be replaced if it opens at lower pressures or leaks. To install this part you will need to use a wrench and possibly a hammer to gently tap out the old valve.

Pressure Cooker Pressure Regulator

Pressure Cooker Pressure Relief Valve

Pressure Cooker Pressure Regulator