EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account
Back
Back
Back
Keep typing for more specific results...

Shop by Department

See All >
Appliance Parts & More Appliance Parts & More Lawn & Garden Parts Lawn & Garden Parts Heating & Cooling Parts Heating & Cooling Parts Power Tool Parts Power Tool Parts Patio & Yard Parts Patio & Yard Parts BBQ & Grill Parts BBQ & Grill Parts Small Appliance Parts Small Appliance Parts Help me find my model number Help me find my model number

Top Appliance Brands

See All >
Whirlpool Parts Whirlpool General Electric Parts General Electric Samsung Parts Samsung Frigidaire Parts Frigidaire

Top Lawn Equipment Brands

See All >
Toro Parts Toro Briggs and Stratton Parts Briggs & Stratton Husqvarna Parts Husqvarna Craftsman Parts Craftsman
Keep typing for more specific results...
Price Match Guarantee
Fast Shipping All Original Manufacturer Parts Genuine Quality 1 Year Warranty
Easy
9003834-1-M-Husqvarna-530023877-Fuel Line Fitting
Part Location Diagram of 530023877 Husqvarna Fuel Line Fitting
See part B-15 in the diagram
( Grid squares measure 1x1 inch )
9003834-1-S-Husqvarna-530023877-Fuel Line Fitting Part Location Diagram of 530023877 Husqvarna Fuel Line Fitting
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

customerservice@partselect.com

Fuel Line Fitting 530023877

 Fits your 128LDX!
★★★★★
★★★★★
1 Review

Easy 

30 - 60 mins 

Rated by verified customers
$ Price Match
OEM badge Official OEM
$ 7.63
  In Stock
Order now and your part arrives by May 3
 Fits your 128LDX!
PartSelect Number PS9003834
Manufacturer Part Number 530023877
Manufactured by Husqvarna for Poulan, Husqvarna, Craftsman, Jonsered

Jump to:

Product Description

Fuel Line Fitting Specifications

The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "Easy". Refer to your make, model and diagram to ensure this part is correct for you.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Why buy the real thing?

OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.

  • OEM from PartSelect
  • Genuine brand name
  • Guaranteed to fit
  • Superior quality and durability
  • 1 year warranty
  • Generic
  • Unknown manufacturer
  • No fit guarantee
  • Inconsistent quality and lifespan
  • Limited warranty and support
Back to Top
You May Also Need ?
Engine Fuel Filter
$9.16
  In Stock
Fuel Line (25" Length)
$12.20
  In Stock
Purge Line
$18.34
  In Stock
Primer Bulb
$18.34
  In Stock
Purge Bulb
$12.20
  In Stock
Fuel Line
$15.27
  In Stock
Foam Air Filter
$6.40
  In Stock
Trimmer Filter
$6.40
  In Stock
Trimmer Carburetor Kit
$55.63
  In Stock
Plug, Spark
$12.20
  In Stock
Kit, Carb. Gasket
$18.34
  In Stock
Air Filter
$7.63
  In Stock
Carburetor
$45.88
  In Stock
PLEATED FILTER
$12.20
  In Stock
Bulb-Purge
$10.71
  In Stock
Fuel Cap
$10.70
  In Stock
Carburetor
$76.50
  In Stock
Chainsaw Fuel Line Kit
$22.93
  On Order
Spark Plug
$9.16
  In Stock
Chainsaw Fuel Tank Vent
$7.63
  In Stock
Air Filter
$9.16
  In Stock
Trimmer Check Valve
$7.63
  In Stock
Assembly-Fuel Pick Up
$10.71
  In Stock
Fuel Line
$6.40
  In Stock
Chainsaw Purge And Line Assembly
$28.34
  In Stock
Fuel Tank Assembly
$55.63
  In Stock
Assembly, Vent Line
$9.17
  In Stock
Trimmer Cap Assembly
$12.20
  In Stock
Plug-spark Rcj8y
$15.96
  Special Order
Affresh Dishwasher Cleaner Tablets - 6
$22.52
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$20.36
  Special Order
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.42
  In Stock
Produce Preserver Filter
$18.22
  In Stock
Refrigerator Deodorizer
$31.58
  In Stock
Affresh Ice Machine Cleaner
$27.36
  In Stock
Back to Top
Troubleshooting
This part fixes the following symptoms:
  • Will Not Start
This part works with the following products:
  • Chainsaw
  • Trimmer
  • Hedge Trimmer
  • Leaf Blower / Vacuum
  • Edger
  • Brush Cutter
Part# 530023877 replaces these:
530023877
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles B - September 22, 2018
  Verified Purchase
fuel line fitting,filters,and air filters
Parts for Husqvarna trimmer and it fit line perfectly. Good prices and quick ship. Very happy. Will buy again from these guys.
  • 1
Back to Top
Installation Instructions
 Average Repair Rating: 3.2 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fuel line size - Important
Be sure the fuel line is the exact same size (id and od) as the one you are replacing. I had purchased a Fuel line from my local dealer - and after a few hours I figured out that it was the wrong size! He simply cut some line from a spool he had. Didn't bother to look it up! The line from this site was perfect! The id is important because the line has to Compress to go through the hole.
Read less
Other Parts Used:
Fuel Line (25" Length) Purge Line Fuel Line Fitting
  • Lawrence from ORION, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
13 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the fuel lines
Replaced all fuel lines. Followed instructions found on Partselect.com, which said to insert cut fuel line in tank and use forceps to reach back in the tank and pull the fuel line through. The problem was that I did not have forceps, or needle nosed pliers that could reach the end of the hose.

Instead of running the line into the tank, I found another suggestion online to run the line from inside the tank outward, allowing me to grab the line with any pliers and thread it. The way I did this was used about a foot length of 14 gauge copper wire. Put an inch or two into the hose (that has been cut on an angle), and use a little black tape to secure the hose on the wire. Now you should be able to route the stiff wire from inside the tank to the fuel hole in the tank. Fish the wire through, and it should be enough to get the tapered end through the tank. Pull the copper wire, mine came out, but there was enough of the hose exposed on the outside of the tank for me to grab with pliers and pull it through.
Read less
Other Parts Used:
Fuel Cap Fuel Line (25" Length) Purge Line Air Filter Purge Bulb Fuel Line Fitting Engine Fuel Filter
  • Robert from MANVILLE, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
19 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Deterioration of fuel line system
Removed the top cover (T25 torx), and side cover (T25 torx) with recoil starter. Drained all fuel, and removed all pieces of fuel old fuel line and the weighted filter from inside the tank by shaking out and the (long forceps). A spot headlamp makes it easier to see inside the tank for much of the procedure. Remove the foam filter to find the two 8mm nuts and remove the air filter housing and carburetor (nut driver, 8mm socket) the choke lever slides out of its slot with some wiggling and moving the carb back off the mounting studs. Leave the throttle cable attached to the filter housing and move both assemblies out of the way to access the top wall of the fuel tank. There is a cover over the carb adjust screws that wiggles out also. The fuel line and purge line both pass through the wall of the tank and need to be pulled out with some effort (long curved forceps) from inside the tank through the fuel fill port. They are a tight fit. Pay attention to the lines size and location. Large line is in the position away from the recoil starter with the little plastic fitting hanging near the top of the tank. The smaller line is closest to the recoil starter. Both new lines will need to pass through the tank wall (this is the most difficult part). To facilitate the initial entry through the wall of the tank, cut a tapered end on your new lines. Use a very slippery lube to coat the end of the line and push it into the tank as far as you can from the top (forceps or soft grip pliers) help. Look inside the tank and pull the lines through fully out of the tank fill (long curved forceps and head spot light). Don't pull all the way through the fuel fill, just enough to install the new fuel line fitting in the return purge line and the new weighted filter on the fuel line and pull the lines back inside the tank. The return line with fitting close to the top of the tank and the filter hanging so it lays at the bottom of the tank, and able to swing around so it keeps contact with fuel at all times. Remove the old purge/primer bulb two screws (Phillips). The short stem is suction, long stem is pressure. Don't mix them up and connect lines backwards, don't ask me how I know! Lol! If you have such a saw like mine, that has no fuel lines intact, it is difficult to vision the line routes. There are helpful schematics on the internet. Just remember that the purge bulb long fuel stem sends pressure back to the tank through the return line (larger line in the tank with the line fitting away from the recoil). That line can now be cut to length and pushed on the bulb long stem. The suction side of the bulb short stem, connects to the purge line on the side of the carburetor (short line). You need to cut that line to the same length as the old one. It has to curve twice to get to the suction side of the purge bulb without kinking. The only other line left is the fuel line with the filter attached hanging inside the tank. Be sure you have the filter able to lay on the floor of the tank and move around. That line connects to the carburetor opposit side from the purge bulb. Dont cut that one until the carb is installed for proper length. The fuel routes from that filtered line into the carb, then out of the carb to the purge bulb suction side, then out to the return line in the tank with the fitting end. That fitting installed into the line serves only to keep the line from pulling back out of the tank, nothing attaches to it. Make sure all lines are clear of the mounting area of the carb, and throttle function. Pass the bulb lines through the slot in the side of the case being sure the lines don't kink. Secure the bulb with the two phillips screws. Position the carb on the studs and slide the choke lever into its place in the case as you go. Place the filter housing on the studs and push the carb and housing down watching the fuel lines for any kinks, especially where the throttle cable is in close proximity to the short carb purge line. Check the throttle function for interferance, and Install the two 8mm nuts. Now route the fuel line around the throttle mechanism out of the way, hold it to the barb on the side of the carb and cut it to length and install. Put some fuel mix in the tank (dont fill it) to test. Press the primer bulb, tilting the saw with fill cap removed, and see if anything leaks, also watch fuel flow back to the tank inside as you press the bulb. You should see fuel and air bubbles from the purge line. When all air bubbles are gone the system is purged. Install the new foam filter in the housing and then the top and side cases. I did not reinstall the cover of the carb adjust needle screws so I could adjust the fuel/ air mixture to run at peak performance. Hope this helps! The kit that I got was perfect and there are some useful instructions included. Thank you! Respectfully Mark
Read less
Other Parts Used:
Primer Bulb Fuel Line (25" Length) Purge Line Foam Air Filter Fuel Line Fitting Engine Fuel Filter
  • Mark from LYNDONVILLE, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
101 of 114 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS9003834
Manufacturer Part Number: 530023877
Brand
Model Number
Description
Husqvarna
120
Chainsaw - 120 Mark Ii
Husqvarna
1202020
Chainsaw - 120 2020- (Us/Ca)
Husqvarna
120E
Chainsaw - 120e Mark Ii
Husqvarna
120EMARKII
Chainsaw - Chain Saw
Husqvarna
120MARKII
Chainsaw - Chain Saw
Husqvarna
120MARKIII
Chainsaw - 120 Mark Iii
Husqvarna
124C
Trimmer - Husqvarna String Trimmer Model 124C/2009-03 (124C/200903, 124C/2009 03) Parts
Husqvarna
124L
Trimmer - Husqvarna String Trimmer Model 124L/2009-03 (124L/200903, 124L/2009 03) Parts
Husqvarna
124R
Brush Cutter - Brushcutter
Husqvarna
125LDX
Trimmer - String Trimmer
Husqvarna
125LDXTEST
Trimmer - 125ldx Test (2010-06)
Husqvarna
128C
Trimmer - Trimmer/Edger
Husqvarna
128CD
Trimmer - 28cc Gas Line Lawn Trimmer
Husqvarna
128DJX
Trimmer - Husqvarna String Trimmer Model 128DJX Parts
Husqvarna
128L
Trimmer - Husqvarna String Trimmer Model 128L/2008-11 (128L/200811, 128L/2008 11) Parts
Husqvarna
128LD
Trimmer - Trimmer/Edger
Husqvarna
128LD9527119692010-06
Trimmer - Trimmer/Edger
Husqvarna
128LDX
Trimmer - Husqvarna String Trimmer Model 128LDX/2008-12 (128LDX/200812, 128LDX/2008 12) Parts
Husqvarna
128LX
Brush Cutter - 128 Lx
Husqvarna
128PS
Pole Saw - 128ps
Husqvarna
128R
Brush Cutter - Brushcutter
Husqvarna
128RJ
Trimmer - Husqvarna String Trimmer Model 128RJ/2009-08 (128RJ/200908, 128RJ/2009 08) Parts
Poulan
1800
Chainsaw - Gas Chainsaw
Poulan
1800 SUPER
Chainsaw - Poulan Chainsaw Model 1800 SUPER (1800SUPER) Parts
Husqvarna
18H
Hedge Trimmer - Hedge Trimmer
Poulan
1900
Chainsaw - Gas Chainsaw
Poulan
1900 LE
Chainsaw - Poulan Chainsaw Model 1900 LE (1900LE) Parts
Poulan
1950
Chainsaw - Gas Chainsaw
Poulan
1950LE
Chainsaw - Gas Chainsaw
Poulan
1975
Chainsaw - Gas Chainsaw
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

Contact Customer Service
Fuel Line Fitting
$ 7.63
  In Stock
✖
Stock Status
 In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.