Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lori N - June 6, 2021
Verified Purchase
Replacement
Worked great
★★★★★
★★★★★
Daniel S - December 18, 2019
Verified Purchase
Watched a video on replacing ice maker housing MUST WATCH VIDEO or you can damage ice maker housing
Time consuming repair go slow as not to damage the ice maker the face plate was easy to replace
★★★★★
★★★★★
DONALD D - May 20, 2019
Verified Purchase
not done
have not done the repair yet.
★★★★★
★★★★★
Patricia P - July 11, 2018
Verified Purchase
Easy installation
Part works great!
★★★★★
★★★★★
James M - July 3, 2018
Verified Purchase
Expensive plastic, but ya need it, ya need it.
Outside the price, some directions like a 5 cnet piece of paper to tell how to replace the part would have been nice. But I found a utube video of a replacement of a similar refrigerator and I got the job done. So at the end of the day, the part itself worked fine. The person taking my order was great, knowledgeable and very helpful, no complaints there, 5 stars for her also.
★★★★★
★★★★★
Sue D - June 20, 2018
Verified Purchase
Piece of Cake!
When the film on the cover started to peel and come off, I grumbled and groused and then found I could order a replacement here at PartSelect. Husband googled how to replace, went out and purchased a suction cup gripper to pull the cover out of place and just like that, the new cover went in. FAST DELIVERY! AND the CORRECT part!!! YAY!!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice / water dispenser control panel cover discolored at bottom due to splashing water
I suggest turning off the water valve and power to the refrig before starting work. If this is not done the water dispenser will probably spray water down the front of the refrig. The whole icemaker assembly must be pulled out from the front. It is a friction fit--just insert fingers in the ice chute and pull out. The entire piece will pu
... Read morell out from the door. The control panel cover is held in by 8 screws that extend through the circuit board to the cover. It is a good idea to unplug the wiring to the circuit board when replacing the cover to prevent tension damage to the small guage wires. Once the new control panel cover is attached to the circuit board, the whole assembly can be reinstalled into the door.
Read less
James from ST AUGUSTINE, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
14 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patricia
February 3, 2018
There is a cover on the led display and control panel. Somehow the vinyl/plastic shield is separating from the control panel. Can this be replaced
For model number 31925ST
Hello Patricia, Thank you for your inquiry. This part is the cover which has the labels on it, part# MCK66585116, and we do have it in stock. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.