
Door Shelf 240351601
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Check if this fits your product and find model diagrams
Need help finding your model number?Door Shelf Specifications

How Buying OEM Parts Can Save You Time and Money
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
19 people found this helpful.
7 people found this helpful.
4 people found this helpful.
4 people found this helpful.
2 people found this helpful.
2 people found this helpful.
2 people found this helpful.
1 person found this helpful.
1 person found this helpful.
1 person found this helpful.
- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
I then began a parts search on my own and found it here at PartSelect for @ $50. I also needed a freezer shelf for another appliance. Got both parts for $120 including shipping. They arrived in 4 days.
The repair was pretty simple.
Open oven door. Open hinge clips on door with small flat screwdriver. Remove door in upward motion. Remove wire racks. Using Cordless drill remove fine thread screws at rear bottom oven tray. Remove heat shield by pulling back towards you while looking down where it attaches and remove from slots. There are 2 screws here. The screws are nearly impossible to take out because of the heat they have encountered. No need to bother with them. Just tug/pullout of designated slots and lift up and out. Bake ignitor will be mounted to the flame tube. Use a small towel to lay in the bottom to prevent from losing the small bolts used to attach to flame tube. Remove with small ratchet. Remove and unplug ignitor. Careful not to let wire fall down the hole. Watch when replacing to insert into the not so visible guide. Reassemble in reverse order.
I think this took me about 30 minutes to complete and the oven seems to be working just fine now. Good Luck! Hope this helps. And I saved @ $250.
-
Jeffery from PAYSON, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
-
Alisa R from TUNICA, MS
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Alison from KIMBALL, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Kathy from WACO, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Thomas from ROANOKE, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
-
George E from CPE GIRARDEAU, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Raymond from GREENWOOD, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
jeanette from PINELLAS PARK, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
MONICA from LANCASTER, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Ray from Millbrook, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
Manufacturer Part Number: 240351601
