Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michele
November 15, 2018
It seems my 18" wide Frigidaire dishwasher has a door spring problem as the door flops down when i open it. Do you have instructions on how to replace it? Does it take special tools?
For model number FDR252RBS1
Hello Michele, thank you for your question. The door spring for your model is part number 154237401 and the plastic bushing that you probably need as well is part number 154671501. This is a very easy repair. The unit should be pulled out from under the counter (which can mean you have to shut off the water and disconnect power). Once the unit is pulled out you will see the door hinges and spring at the bottom front corners. The springs hook into the hinges and are supported by the bushing pad which slides down into the hook that is on the hinge. There may be some installation videos online for you in case you need some help. There are no special tools required. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rod
November 20, 2018
Are there 2 door springs on this model?Thanks!
For model number FDR252RBB0
Hello Rod, Thank you for the question. Yes, the appliance requires 2 door springs. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
