Bake Element 318601604

Hi Vince, Thank you for your inquiry. Before beginning any repair please unplug the appliance from the electrical outlet. Open and remove the oven door. You would need to lift from the back of the oven bottom liner in order to get the panel out. Lift up on the panel then slide it toward the back and then lift it out of the opening. I hope this helps. Thank you and have a great day!

Hello Don, Thank you for your question. You'll need to remove power to the unit and remove the oven from the wall in order to remove the rear panel and access the hidden bake element. There is a cover you remove to remove the element from there. You will see the wires going to the element. Hope this helps!

Hello Mike, Thank you for the question. We suggest testing the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps.

Hello Randy, thank you for your question. Yes, the bottom of the actual oven (the oven bottom panel) is removed by lifting from the back of the panel. Lift up on the panel then slide it toward the back and then lift it out of the opening. I hope this helps. Thank you and have a great day!

Hi Sam, Thank you for contacting us. If the oven is not heating the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. To test the sensor, you will need to reference your owner’s manual to determine what the correct reading should be for your model, as this varies from model to model. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board, the terminal block and the wiring between the parts to see which one is causing the issue. We hope this helps! If you have any questions, please let us know.

Hi Larry, Thank you for your question. The oven temperature sensor is located inside of your oven cavity, usually in one of the top corners. You'll need to remove power to the unit and remove the oven from the wall in order to remove the rear panel and access the hidden bake element. There is a cover you remove to remove the element from there. You will see the wires going to the element. Hope this helps!

Hi Chris, thank you for the question. Based on the description that you have provided, the problem seems to be with the temperature sensor and you may need to replace it, the part number is PS16745361. We hope this solves your problem!

Hi Patrick, thank you for the question. Based on our research, first, you may need to open and remove the oven door. You would need to lift from the back of the oven bottom liner in order to get the panel out. Lift up on the panel, then slide it toward the back and then lift it out of the opening. Now, you can access and remove the element. We hope this helps!

Hello Shawn, Thank you for the question. The price is as shown on the site. Please enter the part number for the current price and availability. Hope this helps!

Hello Gail, Thank you for the question. If the element gets hot but not hot enough or not at the set temperature, I suggest testing the Temperature Sensor, PartSelect Number: PS11758156. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We do not have pick up option sorry, we just ship parts out. Hope this helps!