Motor Housing 4681W1N002B

This convection fan motor is designed for use within various models of ranges/ovens and is a genuine OEM part. It heats the inside of the appliance through the use of a fan and the airflow it creates. This fan motor comes as an individual part without the attaching fan or hardware to secure it. If you hear scraping and scratching noises coming from the fan assembly at the rear of the range, or if the fan is not rotating, this motor is likely damaged or worn-out and in need of replacement. Failure to do so will result in poor heating throughout your range and generally poor performance throughout. To replace this fan motor, you will need a screwdriver and wrench and will need to first disconnect your range from power. Then you can pull the range out from the wall and remove its rear panel. Disconnect the wires connected to the fan motor terminals and remove the securing hardware for the fan motor, which can now be replaced with the new fan motor. Reassemble the rest of the rear panel and connect your range back to power and test the fan motor.