FILTER FINE Assembly WD12X10357
$
21.83
In Stock
Get FREE EconoShip on orders over $100! T&C apply
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS3511267
Manufacturer Part Number WD12X10357
Manufactured by
GE
Product Description
FILTER FINE Assembly Specifications
FILTER FINE Assembly
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
March 27, 2018
Looking to replace part number: Ps3511267 fine filter you stated in the last answer to turn the spray arm counter clock wise this does not remove my spray arm
For model number GSM2200V00WW
Hi Ray, Thank you for contacting us. Very sorry you are correct. On the side of the base of the arm there is a tab you will need to pry outwards a bit with a small flat head screw driver to release the spray arm. It is off to the side on the back side so it is not easily seen. You may have to feel around to locate the tab. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
March 27, 2018
How do I replace part GE wd12x10357 filter fine
For model number GSM2200V00WW
Hi Ray, Thank you for the question. You will need to remove the bottom spray arm by turning it counter clockwise and then pull the filter straight up to remove it. Hope this helps!
Was this helpful?
Thank you for voting!
Joe
November 18, 2022
When putting on part#wd12x10357 filter fine asm, is it supposed to look like it sits crooked.
For model number Gsd2100v55ww
Hello Joe, thank you for your question. To Remove the filter : On the side of the base of the arm there is a tab you will need to pry outwards a bit with a small flat head screw driver to release the spray arm. So, it can be reasoned that when reinstalling it, it may be tricky to snap it back into place. It should not be ill-fitting. We hope this information will help you.
Was this helpful?
Thank you for voting!
MICHAEL
September 8, 2023
I am having the problem with water not draining. I have replaced the Drain Solenoid and Bracket Assembly and it seems the original one was working. I have also replaced the Pump and Motor Assembly which also seems to be working without defect. When I put it all back together I noticed an orange ball floating in the area where the FILTER FINE Assembly attached to the SUMP INLET. Was that supposed to be there and if so where does it go. I did not see it until I removed the Filter Fine Assembly. And I still have the problem with it not draining. The hose is clear also.
For model number GSD3300D35BB
Hi Michael, thank you for the question. It appears that your washer may have a damaged timer control, part number PS6011664, and it needs to be replaced. The orange floating ball that you mentioned goes into the inlet sump. It blocks the path to the fine filter during the drain cycle. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3511267
Manufacturer Part Number: WD12X10357
Manufacturer Part Number: WD12X10357
Brand
Model Number
Description
Back to Top
FILTER FINE Assembly
$
21.83
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.