CONTROL OVEN TO9 Electric WB27T11349

Oven light was easy - Snapped the Wire Bail, removed the Glass Protect and removed the buld. Installed new bulb, installed Glass Protect and snapped the Wire Bail. The Control Panel was a little harder and had to remove the 4 screws holding the metal Back Plate cover. I wrote down all the wire connections and then unplugged the wires. ... Read more I took a 1/4 nutdriver and removed 4 screws holding Control panel in place and removed the Panel. The new control panel did not come with the Switch Face Plate so I removed the old one with a razor blade. The Switch Face Plate had plenty of adhessive so I just aligned the Face Plate with the Control Panel and seated it in place - thankfully it held firmly. I installed the Control Panel with Face Plate into the range and secured it with 4 screws using nutdriver. I plugged the wire connectors into the Control Panel and installed the Metal Back Plate to the range and secured it with 4 screws. Plugged the Range into the sockets and checked it for operation. Everything worked Ok including the new oven light.