With this three-wire high limit/safety thermostat a dryer's heating element will cut out if the internal temperature reaches 290 degrees Fahrenheit. The element will kick back in when the temperature drops to 250 degrees Fahrenheit.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lloyd
June 26, 2019
The hight limit thermostat that i pulled off of my old Kenmore dryer has only 2 connections. Will the replacement work with my dryer?
For model number 11076646100
Hello Lloyd, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS334127 for the high limit thermostat for your appliance. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lori
September 5, 2019
Do you think if i just buy the thermostat for my dryer it will get hot again? Because i looked at the heating coil and it didn't look discolored as in burnt or rusty looking it was still the greyish silver colored and looked broken on it?
For model number lfe9800go
Hello Lori, thank you for your question. Any heating issue is usually caused by a thermostat, or fuse, or bad air flow from inside the dryer. We would recommend cleaning out the unit very well, and testing/replacing the thermostats. The heating element very rarely goes bad, and when it does its usually easily spotted by a broken wire, or discoloration. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
NANCY
September 19, 2017
Clothes dryer doesn't dry clothes enough
For model number LER4634JQ
Hi Nancy,
Thank you for the question, The most likely problem would be the Thermal Cut-Off Kit,PartSelect Number PS334299.The thermal cut off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires. If your dryer is not starting properly, shutting off too soon or is taking too long to dry your clothes it could be because it has blown and needs to be replaced.
Hope this helps!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff