changed from nat. gas to lp gas..did not have orifices and had to order from ya'll.
I built a island/bar for this unit. tiled it and everything and spent hours hooking up the gas and electric for the igniter only to discover the orifices for lp gas were not with it..bummer. I went online and found your website. best search I ever did. I ordered the parts and received them in a couple of days. very good. I replaced the or
... Read moreifices in a few minutes( i used a nut driver and a pair of needle nose pliers to pick up the orifice i dropped inside..whew) and we were cooking. Man I love that Texas cooking,mama...I would send pictures of the completed project but it expanded. I now have a new sink and countertop done. Actually remodeled the kitchen, all that from some little orifices? My wife loves it and so do the kids.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
April 19, 2018
The igniter does not stop clicking knobs are off . I think i need to replace the spark igniter switch and harness assembly ps953094 and spark module ps952864. Can you confirm these are the correct parts for my GE cook top. thanks
For model number JGP933BEK2BB
Hi Tony,
Thank you for your question. Yes, both of those parts work with your model. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Angie
January 10, 2019
Hi. I'm wondering if I converted my stove into a propane stove am I suppose to change this parts to get more flames? I feel like my stove doesn't have much power. If so what parts would i need for all the burners. Or how should i proceed. Thank you.
For model number JGB282DET1WW
Hello Angie, Thank you for the question. very sorry but you would need to be with the appliance to know if it is converted to LP gas. You will need to check the setting on the gas valve to see if it is set for LP or Natural. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Brian
July 27, 2021
I need to order natural gas orifices, are they available?
For model number JGB250SET2SS
Hello Brian, Thank you for the question. The Natural Gas Orifices are sold as part of the Orifice Holders. We hope this helps!
We bought a gas GE stove. The former owners used it with LP, we have Natural gas. Do we need to buy new orifices or a regulator? The burners & oven work, it just seems to not have enough of a flame. Any advice you provide is greatly appreciated.
For model number JGB281DER3CC
Hello Chris, Thank you for your inquiry. The orifices for natural gas are smaller that the ones for liquid propane as natural gas is fed at a smaller pressure. We have researched the model number you have provided and to convert back to natural gas, you would need to purchase the orifice holders, which contain the NG orifices. On the control valve, you would need to flip up the cap and flip the pin that is underneath of it, then unscrew and flip the orifice on the other side. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Unable to turn off ignitor, which part do i need to replace
For model number JGP933BEK2BB
Hi Tony,
Thank you for your question. If the ignitor is not turning off, then the issue is likely the spark igniter switch and harness assembly and you will need to replace it. This harness assembly has 5 igniter switches already wired into it. It includes the igniter switches and the complete wire harness for all the surface burners. The igniter switches ignite the fuel for your cooktop. If one of the igniter switches has gone bad, you will need to replace the entire assembly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
