This selector knob, also be known as the laundry appliance control knob, is meant for your washer or dryer. This model is sold individually and takes a D-shaped shaft. The purpose of this part is to attach to the shaft of a rotary or starter switch, which is located on the control panel. To install this part, remove your old selector by grabbing it with a firm grip and pulling it straight off. If the metal insert came off with the old part, pull it off as well, making sure the new knob will have enough room to snap in its place. No tools are required to make this repair.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kathleen S - May 22, 2023
Verified Purchase
Easy fix
the replacement knobs worked great!
★★★★★
★★★★★
Elaine D - August 1, 2021
Verified Purchase
Easy repair
Just pushed it on. Works perfectly. Much better than the pliers I was using!
★★★★★
★★★★★
Donna K - July 30, 2021
Verified Purchase
knob
Part worked perfect but i do feel the pricing was high.
★★★★★
★★★★★
Sean B - May 18, 2021
Verified Purchase
It's exactly what I needed
Such a simple thing but does so much.
★★★★★
★★★★★
Carole S - May 15, 2021
Verified Purchase
Easy replace, quick shipment
Exact replica of the original (broken) part
★★★★★
★★★★★
Cathy C - March 30, 2021
Verified Purchase
Easy, Quick Replacement
I purchased 2 selector knobs for my washing machine. Couldn't have been easier - just unwrapped them and slid them right on the connectors.
My order came in very quickly
★★★★★
★★★★★
Jane C - October 8, 2020
Verified Purchase
Works Perfectly
Received the part in great time, it fits perfectly and works perfectly!
★★★★★
★★★★★
Gary C - April 30, 2020
Verified Purchase
works great
The part is working well.
★★★★★
★★★★★
Scott B - October 30, 2019
Verified Purchase
Good part. Fit perfectly
Came fast with no problems.
★★★★★
★★★★★
Helen K - October 27, 2019
Verified Purchase
Easy repair-easy to install- no problem.. Advice about removing small cylinder before insertion, made installation simple. Great helpful tip.
Part perfect. Now I can finally make washer selection! Small part, but absolutely critical.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 59 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
First, removed the metal access panel by removing screws. (EASY) Second, pressed the timer knob onto the timer shaft. (EASY) Third, mounted the start switch to the mounting surface. (A BIT DIFFICULT)
Fourth, pressed the start knob onto the freshly mounted start switch. (EASY)
Fifth, replaced the metal acces
... Read mores panel by replacing screws. (EASY)
This repair took only about 15 seconds to complete. It just involved pushing the new knob on the selector. The provided video should give you the confidence to complete this task.. I invested $11.00 for the part. I would hate to see the cost to have a repairman come and fix this. Worth every penny
William from Alexandria, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
starter switch and knob broken
remove power cord from outlet . remove upper rear panel . remove 2 wires . remove old switch . . install new switch and wires , replace rear panel , install knob , plug in power cord and check dryer operation ok. 5 min job.
I ordered the part one day & it arrived the next day(UPS-Ground)I replaced broken knob with new one & everythings just fine. Thank you for your prompt service !!
Robert from Clearwater, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
selector knob broke
I ordered replacement knob for washing machine. It arrived by fedex in 3 days. Ordering was easy and transaction went as smooth as it could. I will order again if needed.
Gary from Terre Haute, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
19 of 609 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken and worn out knobs
was just a pop off -pop on knob replacement for worn/broken knobs. Easy on ,less than a minute. The BEST part of my repair...finding exactly the parts I needed and fast shipping, also the site for selecting your parts and trouble shooting repairs is extremly customer friendly......highly reoommend your site/services. Thanks
Patsy from Wytheville, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs Do Not Fit Securely
Took broken knobs off and replaced with new ones. Only one fit snuggly; the other two are raised and wobbly.
Marie from Marlboro, NY
Difficulty Level:
Difficult
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knobs broke
Just put them on. there wasnt any thing hard to do.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I Need The Virginia
January 18, 2018
In the video you are replacing the middle knob. Are the 3 knobs all the same? I need the one that starts the dryer- the one on the right.
For model number GLER341ASI
Hello Virginia, Thank you for your inquiry. All 3 knobs are the same for this model. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
January 7, 2018
Is the selector knob the same as the on knob?
For model number GLER331AS2
Hi Kathy, Thank you for the question. The Selector Knob, Part Number: PS2330885 are the two smaller knobs tot he left of the panel. The Timer Knob, Part Number: PS2330897 is the main knob on the right. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
October 6, 2017
Dryer runs but no heat.Replaced the element still no heat but noticed the selection knob was not advancing. Could this be my problem?
For model number LER7648KQ
Hi Tim,
Thank you for your question .Yes, it could be. However I would suggest checking your thermal fuse, all of your thermostats, and your door switch as well first. In that order. Those are usually the parts that cause this sort of problem. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
October 8, 2017
Is this a set of knobs or just an individual knob?
For model number GLGR642AS5
Hi Gene,
Thank you for your question. This would be just for one knob. They are sold individually. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Katie
December 5, 2018
Our knob broke off, and the spot it was at is now flat with the dryer, and we are unable to turn it on. Would a new knob replacement be what we need?
For model number Ferb5700ds0
Hello Katie, Thank you for the question. You will need to replace the switch that the knob fits onto. Please feel free to submit a new question with what the knob controlled or what switch was broken and we will be happy to help you with the correct part number. Looking forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Penny
February 10, 2020
My washing machine pull start is broken. Can it be replaced
For model number 127R65E66802816812
Hi Penny,
Thank you for your question. Before we can assist you further, we would need the model number from your washer. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mary Ann
July 20, 2021
The knob to start the dryer broke off. I need to replace the knob. Inside the knob, there are 2 numbers: Kip6uo6 and 1340349. Can you please tell me what part I need to order? My dryer model number is gler642as3
For model number GLER642AS3
Hello Mary Ann, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2330897. We hope this helps!
My washer and dryer set is a very old model, i’m not sure if this selection knob fit it. Please help check, thank you.
For model number 131495400
Hi Jessie,
Thank you for your question. To verify the correct knob for your washer, we would need the model number from it. If you could resubmit your question with this information, we would be happy to help you with this. Here is a link where you may find the model number on your washer, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. If you have any questions, please let us know.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dawn
November 13, 2021
Hi- I need to replace the starter knob on a Frigidaire washer dryer combo GLGT1031c. It's the 2nd knob from the left hand side, above it says "turn to start". Which knob is the right one for me to buy please? THank you
For model number GLGT1031c
Hello Dawn, thank you for writing. We have researched the model you have provided and have found the part you are looking for is PS2330889. We hope this helps.
The knob on my Electrolux stackable dryer is not triggering the machine to start. It normally clicks to go on.
For model number MEX731CFS0
Hi Joanne,
Thank you for your question. If the knob is not activating the start switch, then the switch may no longer be working. To verify if the start switch is working, you can test it with a multimeter. We have included a link that you may reference for information on how to test the start switch. The part number listed under your model number for the start switch is PS1146154. If you need to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
