Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This part does not include the dispenser cup that is found on the top of the upper agitator.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carter B - February 15, 2018
Verified Purchase
Perfect
Simple, easy, works great, would recommend to friends
★★★★★
★★★★★
Margaret H - June 13, 2020
Verified Purchase
Easy repair. Perfect fit
The part came quickly and was easy to replace. Our washer is back to perfect working order!
★★★★★
★★★★★
Douglas D - January 11, 2019
Verified Purchase
Easy to repair/replace this agitator. No problems
The part was easy to install and made a big difference on how the machine cleaned our clothes.
★★★★★
★★★★★
Amy F - February 27, 2018
Verified Purchase
The part was a perfect fit...in 10 minutes we were back up!!!!
The part was a perfect fit...in 10 minutes we were back up!!!!
★★★★★
★★★★★
JOHN M. B - May 8, 2019
Verified Purchase
MAYTAG AGITATOR AUGER REPAIR
WITH PARTSELECT VIDIO THE REPAIR WAS EASY AND WORKS GREAT
★★★★★
★★★★★
Joseph K - March 28, 2018
Verified Purchase
Perfect part and easy repair
Washer is working perfect. Only took 5 min to replace.
★★★★★
★★★★★
Curtis L - March 26, 2019
Verified Purchase
Maytag agitator replacement
it was easy to change and worked well.
★★★★★
★★★★★
John P - October 2, 2021
Verified Purchase
Return
I ordered the wrong part, couldn't find the model # on machine. Anyway, I ordered it on pictures alone and I ordered the wrong part. They helped me with the return and gave me a full refund.
Honest and Reliable, I will stick to ordering directly from PartSelect.com because I usually make at least two to three mistakes every time I repair my own machines so I need a place easy to deal with when it comes to returns.
Thank you,
John P
★★★★★
★★★★★
Luis M - January 25, 2020
Verified Purchase
Worked great!
Thankyou for being there to make this fix easy
★★★★★
★★★★★
Vanessa K - March 10, 2018
Verified Purchase
easy repair
Had no problem replacing the broken agitator with the new one. Loved the instructional video!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top of agitator was loose and would come off.
I removed the nut from the bottom of the old agitator, slipped it off and put the new one on. After tightening the nut it worked just fine.
Wayne from La Grange, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
12 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator didn't turn
Took out one screw, set new on in, rescrewed in. Just remember to keep your fabric softner cup. Super easy. We paid for next day delivery, and it arrived by 9:00 a.m. the next day.
Theresa from Prescott, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
9 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top auger section won't stay locked together
Ordered a new replacement agitator, removed the old agitator with the loosening of set screw on the base of agitator, which slips over the gear spline and installed the replacement agitator, tighten the set screw with nut driver, OH, you have to use the fabric softener cup, which snaps off the old agitator and install it on the new agitat
... Read moreor. Wha-la!
Read less
Manuel from Vacaville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
14 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top part of the agitator was loose and would rotate.
A 5/16 socket on a ratchet was used to loosen a screw. Remove the agitator from the splined shaft by pulling straight up. Slide the new agitator onto the splined shaft and tighten the new supplied screw.
Michael from East Liverpool, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
21 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator not agitating
old agitator stripped plastic splines. pulled up and out old agitator, aligned and pushed (hard) down new agitator, tightened nut. easy-squeezy!
Steve from Check, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
27 of 34 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator top section was broken
Loosened set screw, removed agitator, installed new agitator and tightened set screw done
Beverly from Conehatta, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
60 of 76 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator was slipping,
Removed 1 screw with 5/16'' nutdriver on lower area of agitator and unit slipped off spline like butter. Replaced with new unit and simply tightened the holding screw. Repair Dude wanted 179.50 for this repair. I saved over $100.00 doing this myself. Cool.
Scott from Lac du Flambeau, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
15 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judy
September 10, 2017
The agitator separated into two pieces. The base that has the bolt that requires a nut driver to remove stayed in its locked position. I put the top part( not fluid cup) on the base turned until it went down into place. It floated to the top again. Couldn't keep it on the remaining base. Would a new agitator assembly eliminate the problem and keep the radial fin part locked to base of agitator. Thank you
For model number LAV3600AWW
Hi Judy,
Thank you for your inquiry. Yes it would. It looks like the manufacturer now makes that all as one complete part. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
February 18, 2018
We have the agitator out. Should it rattle when you shake it?
Hi Kathy,
Thank you for your question. It should not. The cogs in your agitator might be broken and you may need to replace the part. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
March 18, 2018
Under the agitator is a screen. Is that removeable to be cleaned? I am replacing the agitator but the screen looks very dirty.
For model number LAT3600AAE
Hello Joe, Thank you for your inquiry. Yes, you can pull this part out to clean it. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vicki
April 4, 2019
My replacement agitator will not stay on it comes loose during the spin cycle and rises up,i have to push it down and keep tightening the screw during the wash cycle. Is there a way to keep it in place.
For model number LAV3600AWW
Hello Vicki, Thank you for the question. I suggest checking to make sure the o-ring is with the screw and it is not wore or the screw is not stripped and needs to be replaced. PartSelect Number PS2019801. Hope this helps, good luck with this repair!
Will your part number ps2019803 fit in model number pav3300agw . Thanks
For model number PAV3300AGW
Hello Anil, Thank you for contacting us. I am not showing PS2019803 is a compatible part for this appliance. I have researched the model you have provided and have found the base for this model is PartSelect Number PS2017908. The Upper part of the agitator is PartSelect Number PS2018203. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Agitator not agitating. Base turns freely clockwise and does not engage agitator but when turning counter clockwise it engages the agitator. When in the washer it spins clockwise during wash and counter clockwise during the rinse and spin. But will not agitate during wash.
For model number LAT8416AAM
Hello John, thank you for writing. The two main parts to check out are the Belt Kit PS2005284 and the Agitator Auger and Base Assembly PartSelect Number PS2019803. We hope this helps.
Hi, the agitator i have has the base and fin part seemingly like two pieces...although i cannot get them apart, there is about a half inch of wiggle room where the top (fin part) can be pulled/pushed up and down. is this its normal function or is it broken?thanks,tb.
For model number LAT9356AAE
Hello TB, thank you for your question. The top part of the agitator will be able to be moved up and down a little bit, but it will not come apart. This is the normal function of the agitator. They won't actually come apart into two pieces. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Larry
November 9, 2019
So I put a new agitator in and the agitator shaft came out. Can I just push that shaft back in the washer?
For model number LAT9416AAE
Hello Larry, Thank you for the question. As long as the shaft is not damaged, it should be able to be pushed back in place. Hope this helps!
Was this helpful?
Thank you for voting!
Lisa
November 20, 2018
I believe there is a necklace stuck in the agitator. We are trying to remove the agitator but we read that the screw is on the side. We do not see one on side, but a bolt on bottom or fabric softener dispenser. Is this correct, we are worried to break the dispenser but cannot release the bolt.
For model number maytag mvwc565fw
Hi Lisa,
Thank you for your question. There is a video listed with the part you have referenced in your question to us that may help you remove the agitator. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Steve
November 29, 2017
When I pull up on the agitator assembly, it comes out with the drive shaft. I can look right down through the seal into the transmission. What keeps the shaft in place? It does not sound right to me that the shaft should pull out. If I load it with sheets and towels the screw action causes the agitator to lift just enough so that it stops turning. What part will fix this and how?
For model number LAT2301AAE
Hello Steve,
Thanks for your question. There is a screw on the side of the agitator which may be loose or missing. Check that to see if there is any problem with the screw. If not, the agitator itself may need to be replaced.
I hope this helps.
