Maytag/Maytag_Thumb/51892.gif
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Ice Bucket Auger Drive Motor Kit

$ 147.32   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS2003313
Manufacturer Part Number 12001773
Manufactured by Whirlpool
Product Description

Ice Bucket Auger Drive Motor Kit Specifications

This motor kit comes with a thermally protected motor, a washer and a mounting bracket. The motor performs eighteen revolutions per minute, carries 115 volts, and drives the auger for the icemaker.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Admiral, Maytag, Jenn-Air, Magic Chef.
Part# 12001773 replaces these:
AP4009036, 785397, 103472, 12001773, 12001774, 61003323, 61004865, 63067-1, 64143-1, 64143-3, 65186-1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Dick
    January 3, 2018
    When i dispense ice cubes the unit groans and growls like it is really being stressed. I feel it may break before too long. I read about auger issues and feel it is probably related. I'm hoping there is a simpler and less expensive solution than a new auger drive motor kit. Thanks in advance, dick
    For model number MZD2752GRQ
    Hi Dick, Thank you for your question. Based on what you described, I would check the auger and the auger drive motor. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    SALLIE
    August 7, 2019
    Ice maker is despencing ice very slowly and sounds like it is moaning and groaning as it is doing so. Can you help?
    For model number MZD2766GE
    Hello Sallie, thank you for contacting us. This sounds like a faulty Auger Drive Motor, part number PS2003313 for your model. Good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    David
    September 26, 2019
    I hope you can share wiring diagram for the ice bucket auger drive motor, as I have removed wires and not positive how to put back on. The auger drive motor is part select #ps2003313, manufacturer part #12001773. There are three wires and one without plastic cover is likely the "ground". Not sure which terminal the other two should go to. (potential problem would be reverse direction of auger motor?)
    For model number Jenn-Air JCD2389GTB
    Hi David, the wiring diagram is under the JCD2389GTB listing on the wiring information page. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Enrico
    October 18, 2019
    The plate to which the auger motor is attached is broken. The motor had come loose totally off its mounting location. Not sure how that happened. The motor still turns a bit noisy. I can see that the motor is available but i don't see any part number for plate or assembly to which the auger is screwed on.
    For model number MSD2454GRW
    Hi Enrico, sadly the requested part is discontinued, however you can contact the manufacturer to see if they have a suggested replacement. If they can provide you with a part number feel free to contact us back to see if we have the part in stock. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Curtis
    February 19, 2020
    The part where the ice bucket auger mounts to is broken, there is a large hole where the auger motor was mounted can i replace this part?
    For model number MSD2454GRW
    Hello and thank you for writing. Regretfully no, you would have to replace the ice maker itself PS2121513. We hope this helps. Please contact us anytime if you require further assistance.

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.1 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Quick and Easy Install of Ice Maker Parts
        Several days back I found I couldn't get any ice from the ice maker. I was able to hear noise from the ice maker but no ice would dispense. I opened the freezer and removed the ice bucket to find out that the Auger has broken off from it's plastic housing in the back of the freezer. I went to partselect.com to find the part(s) that were broken, it was much easier because of the diagram/images they have for each individual section of the fridge. Parts came quickly and as expected.

        The replacement of the auger motor is very easy if you follow these steps:

        1 - Remove the ice bucket from the freezer
        2 - Unscrew the one screw on the bottom left side of the ice bucket tray (the tray holds the ice bucket in place). I used a small needle nose plier to remove this screw as I was having a hard time with my drill or wrench set. After you've removed the one small screw, lift the tray up and slowly pull towards you.
        4 - You'll quickly see that the auger motor and magnetically controlled yoke are connected with a wire harness to the back of the freezer.
        5 - Gently crimp the ends of the wiring harness connector with your hand and slowly pry away from the freezer. Once you've removed the wiring harness you can remove the entire tray with the parts attached (yoke/auger)
        6 - Unscrew the auger motor from the tray. You'll also have to remove the auger from the motor else it won't come out. In my case the whole plastic attachment was broken so I didn't have to do this (ie I replaced the ice tray as well). It was impossible for me to remove the auger from the auger motor, not sure why the auger was so tightly attached to the motor - it could be the reason the auger motor broke from the ice tray?, so I had to buy a brand new auger motor and auger (ie Auger Drive Motor Kit). I hope you have more luck then I did removing the auger. If you can't remove it you'll need to buy the Drive Motor Kit (which comes with the drive motor, detached auger and auger washer).
        7 - Once/if you've removed the auger from the motor and remove the motor from the ice tray, you can proceed with the replacement of motor.
        8 - Using needle nose pliers remove the three power connections on the motor (white/neutral?, pink/power?, green/ground, note where the connections were when you removed them because you'll replace them in the same place on the new motor).
        9 - Attach new motor to ice tray with the four screws, attach the auger and auger washer to the auger motor, attach the power connections back (white, pink, green).
        10 - Re-connect the wire harness to the back of the freezer
        11 - Move ice tray back into place, and attach the one screw back to the ice tray to hold it in place.
        12 - Replace the ice bucket back onto the ice tray
        13 - Done, you should now get ice!

        Good luck, I hope this helps. It's easy and you don't have to pay three times this price to replace these ice bucket parts.
        • Walter from Woodbridge, VA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WP69715-1, 12001773
        21 of 24 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Auger drive motor pulled away from enclosure and water was leaking into the ice bucket
        Removed the screws holding the housing inplace pulled and threw away than went to install the new drive motor but the screws were of a different thread so reinstalled the old motor and put the housing and bucket back together. after thawing out the water fill tube put it back into the cup-water fill and put clamp back in place. system is performing like brand new.
        • Charles from Helendale, CA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        • Parts Used:
          61005625, 12001773, WP628356
        9 of 16 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Ice bucket auger yoke was stripped out and turned freely
        Removed the ice bucket from the freezer. Removed the single screw on the left side with a nut driver, then lift and pull the tray toward you...there is a wiring harness in back of the tray that I had to unplug...easy, pinch the sides of the plastic connector and it disconnects..and the tray came out of the refrigerator...and the cussing started. Since the threaded yoke was stripped it could not be unscrewed from the motor shaft...I took my trusty Dremel Tool and cut the shaft off so the yoke could be separated from the motor shaft and the motor could be removed from the plastic housing. From here on it was a piece of cake...install the new motor and screw the new yoke onto the motor shaft... I think it has a left handed thread, like the old propane bottles used to have..slide the tray back in, reconnect the wiring harness (it only plugs in one way), make sure the tray is sitting on the 4 side supports, put the single screw on the left side and you are done....put the ice bucket back in and flip the bail down and you should be back on business....!!
        • James from Pineville, LA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          12001773
        8 of 8 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The Shaft of the Auger Drive Motor Became Stripped
        I removed the one nut screw holding the Ice bucket shelf then removed the Ice Auger Container. Then I lifed the Part containing the Drive Motor. I removed the electrical connection which just plugs into the fridge. Once the Drive motor and container was out of the fridge I removed 4 screws and the Drive motor was out. I disconnected 3 electrical connectors and connected them to the new drive motor. Then replaced the motor and connected the 4 screws. I then installed the yolk on the drive shaft and then put the drive motor container back in the fridge and reconnected the electrical. Installed the nut screw and I was done.
        • Anthony from Amenia, ND
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          12001773
        7 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Ice Maker would not dispense ice
        Had to cut the old part off with dremel then just install new part and put back in refrigerator. It is a good thing to know that the Yoke is a left threaded. Thanks James from Pineville.
        • Cindy from BEN WHEELER, TX
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
        • Parts Used:
          12001773
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        all 8/32 and holes should have been tapped
        had to saw off the shaft to get the yoke off and tap the holes for the 8/32 screws. all holes should have been tapped by the factory. Other than these problems, everything else went pretty good.
        • Allen from Westcliffe, CO
        • Difficulty Level:
          Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          12001773
        1 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS2003313
          Manufacturer Part Number: 12001773
          Brand
          Model Number
          Description
          Maytag
          12001685
          Ice Maker
          Maytag
          12001687
          Ice Maker
          Admiral
          19902-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19903-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19922-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19922-7A
          Refrigerator - REFRIGERATOR
          Admiral
          19923-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19923-7A
          Refrigerator - REFRIGERATOR
          Admiral
          19972-0A
          Refrigerator - REFRIGERATOR
          Admiral
          19972A
          Refrigerator - REFRIGERATOR
          Admiral
          19972B
          Refrigerator - REFRIGERATOR
          Admiral
          19972C
          Refrigerator - REFRIGERATOR
          Admiral
          19973A
          Refrigerator - REFRIGERATOR
          Admiral
          19973B
          Refrigerator - REFRIGERATOR
          Admiral
          19973C
          Refrigerator - REFRIGERATOR
          Admiral
          19992A
          Refrigerator - REFRIGERATOR
          Admiral
          19993A
          Refrigerator - REFRIGERATOR
          Admiral
          20022-0A
          Refrigerator - REFRIGERATOR
          Admiral
          20872A
          Refrigerator - REFRIGERATOR
          Admiral
          20872B
          Refrigerator - REFRIGERATOR
          Admiral
          21962A
          Refrigerator - REFRIGERATOR
          Admiral
          21962B
          Refrigerator - REFRIGERATOR
          Admiral
          21962C
          Refrigerator - REFRIGERATOR
          Admiral
          22512-0A
          Refrigerator - REFRIGERATOR
          Admiral
          22512-0B
          Refrigerator - REFRIGERATOR
          Admiral
          22572A
          Refrigerator - REFRIGERATOR
          Maytag
          22752
          Refrigerator - REFRIGERATOR
          Maytag
          22753
          Refrigerator - REFRIGERATOR
          Admiral
          22802-A
          Refrigerator - REFRIGERATOR
          Admiral
          22902-OA
          Refrigerator - REFRIGERATOR

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service