This is a 1000/2100W element and includes the limiter.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Tappan.
Part# 389082702 replaces these:
316049703, 316049705, 316049707, 318178001
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
2.5
Filter By Rating:
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles T - October 31, 2023
Verified Purchase
Took some adapting but worked great
I wrote a detailed review with photos. Not sure why it asked for another review.
★★★★★
★★★★★
Lisa G - September 26, 2018
Verified Purchase
Wrong part
I called and talked to one of their people because I wanted to make I was ordering the right part , they sent wrong part called customer service they were great sent me return label, reorder the part had to pay for and wait on my refund on first part was told that they would double check part before shipping to make sure right part was being shipped got it and it was wrong sent it back and bought part from another place.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace the dual-element burner in glasstop range
The how-to video was helpful, though my old range has an extra spacer panel between the glass-top and oven, requiring an extra couple of screws to be removed, with different-sized Philips head.
1. Replacement part was not exactly like the original. * Inner and outer elements lacked an insulating spacer. * The two
... Read morewiring terminals/docks were swapped. * So had to attend to where the wires were going. * Worked, just needed some observation & thought.
2. MOUNTING HOLES a. Old element had clips mounted at holes 9 & 45. b. Old element had the four-terminal wiring dock attached by screws at 71 & 72 (also where 0 would be), “ahead” of the small three-terminal port by about 5 number positions. c. Corresponding holes in replacement were not the ones with pre-drilled insulating material. But it's really soft and easily drilled by hand. Probably could have just screwed directly into it. d. Replacement four-terminal dock is “behind” the smaller one by a few number spots.
3. WIRING IS REVERSED As noted, the two terminal docks are swapped, so watch the wiring.
Old terminal docks/ports were directly connected by a wire shunt that tied those terminals to the inner ring element.
The new element also has inner/outer burners, with no separation, but we can trace the wiring. Instead of a shunt, the docks are connected via the element. The right port on the small dock is connected to the inside burner, and that inside burner element exits into the large dock. That’s the inside-burner circuit.
Read less
Charles from RESTON, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned double element
I must say that I am very pleased with speed of your part delivery, I have to ad that the first part I received was defetive, the inner element was open and therefore it was not working, I called back and a very curteous person took care of the problem, I got a replacement part 2 days later and now all is OK. Very good service indeed
... Read more, Thank you.
Read less
Bartolino from Ormond Beach, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
29 of 69 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.