We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Booker
October 1, 2021
Refrigerator not cooling. Hi-temp light is on.
For model number fpru19f8rfc
Hello Booker, Thank you for your question. If the refrigerator is not cooling, there are some parts that you will need to check to see which one is causing the issue. You will need to check the defrost timer, the control kit, the defrost thermostat, the filter-drier, the evaporator fan motor and the defrost heater. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bonnie
July 15, 2019
Electrolux refrigerator with bottom freezer displays incorrect interior temp of the refrigerator. Keeps trying to adjust. Is this the temperature sensor? Will the sensor displayed be compatible with this model? How do we replace it? Thank you for your help.
For model number EW23BC85KS7
Hi Bonnie,
Thank you for your question. This would not be the correct sensor for your refrigerator. The part number listed under your model number for the temperature sensor is PS1765215. It detects the temperature inside the refrigerator and sends information to the electronic control. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kevin
November 3, 2022
Both Fans Are Running, Both Coils Are Clean ,The Compressor Is Running. Could The Main Control Board Be Causing The Refrigerator Not To Cool? Or Would IT More Likely Be The Temp Sensor?
For model number FPRU19F8RFC
Hi Kevin, thank you for your inquiry. According to our research, if everything you mentioned is working fine, then the issue is probably with the temperature sensor, part number PS1527511. If that does not help, replace the control board, part number PS12705248. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
In an effort to correct a too cold refrigerator , ( goes down to 22 F) a SubZero thermistor ( No.4204150) was changed on my Frigidaire. It didn't seem to correct the problem. Are the SubZero & Frigidaire thermistors interchangeable???
For model number FPRU19F8RFC
Hello John, thank you for your question. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat, part number: PS1525674. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater, part number: PS426768. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor, part number: PS1527511. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So, it is suggested you check them first. I hope that helps. Good luck with your repair.
If the temperature is being displayed on the electronic control display, is the thermistor working or does the control get the temperature from elsewhere?
For model number fgru19f6qfa
Hello Douglas, Thank you for the question. The Temperature Sensor tells the controls board what the temperature is inside the appliance. If the display is accurate with the temperature inside the appliance, the Sensor is good. We hope this helps!
Was this helpful?
Thank you for voting!
Brad
February 23, 2022
My fridge cools below the set temperature on the digital selector. If I set it to 38 it will constantly run. It’s now at 32 and it’s still not shutting down. If I put the selector to 45 degrees it still doesn’t shut off. I tried the capacitor and that wasn’t it. Do you think it could be the temperature control that is bad? What is the ohm reading of the temperature control sensor?
For model number FPRH19D7LF1
Hello Brad, thank you for writing. It should read around 16.6 K ohms or 16,600 ohms +/-5%. If you don't own an ohmmeter or are unsure how to properly use it, replace the sensor PartSelect Number PS1527511 if you suspect they are bad. Also, check the Electronic Control Board PartSelect Number PS3493013. Good luck with your repair.
Electrolux refrigerator, temperature inside goes below 31 Fahrenheit and freezes everything, from water to vegetables even when panel displays 46 degrees. I believe sensor is damaged. Is this the correct part?
For model number E32AR75JPS1
Hello Gerardo, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1527511. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Claudia
March 17, 2022
My Fridge is beeping and displaying E8 for a couple of seconds before resetting itself to factory setting temperature. I was told it is the temperature sensor that needs replacement, is this correct?
For model number FPRH19D7LF1
Hi Claudia,
Thank you for your question. The E8 error code indicates that the thermistor has shorted and it will need to be replaced. The part number listed under your model number for the temperature sensor is PS1527511. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Ted
June 3, 2022
Fridge will not maintain the 37f I set. Stays a while then rises to 52 and the back
Hello Ted, thank you for you for question. Dirty, or blocked compressor coils will cause your fridge's temperature to fluctuate wildly. They need to stay clean to let the heat escape, or it just circulates back into the fridge. We hope this helps. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Jose
October 14, 2021
Freezer showing an E9 error code and beeping
For model number FPUH19D7LF0
Hello Jose, Thank you for your inquiry. The E9 error code indicates that the temperature sensor or temperature control. We recommend testing your sensor with a multimeter to see if it has continuity. You can also test the defrost thermostat. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff