Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeremy
September 30, 2017
This part, is it the one that's below the floor of the oven? The one that heats up and will allow the gas tube in the floor of the oven to actually be lit? Mine is currently glowing but after 90+ seconds still won't light the gas and as such i don't get any heat in my oven. The other part that it recommended(316489403) looks like it'd be replacing one in the top of the oven for a broiler lighting. Is that correct? Just want to make sure i order the right part.
For model number 790.77433902
Hi Jeremy,
Thank you for your inquiry. Yes this bake element is under the bottom panel in the oven. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
July 5, 2021
Broiler glows but does not ignite. Would this part be the cause?
For model number 790.74332310
Hello Jeffrey, Thank you for the question. We suggest testing the Igniter. With a multimeter set to OHMS, connect to both igniter leads. On a good igniter, there should be between 40 & 400 OHMS. A bad igniter will show no resistance or continuity. We hope this helps!
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Frigidaire Range Broiler Igniter
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
replace bad oven ignitor
Oven ignitor is on the bottom gas unit. Ignitor is in oven and plug is in warmer oven on left wall at very back of warmer oven. It has duel function to light both upper and lower gas burners (in oven). Wires of new plug that I received were shorter than existing wires and would not reach the plug from ignitors center mount location to plug at far back of warming unit on left wall. Even if the wires would have been long enough, I couldn't figure out how to "release" the existing plug. Easy solution: Cut old wires at junction of old ignitor (leaving wires as long as possible). Cut new wired as close to new male plug as possible (leaving wires as long as possible on new ignitor). Strip ends of old and new wires and wire nut with porcelin wire nuts (hardest part of job was locating porcelin wire nuts)! After placing wires out of the way of burner and ignitor, reassemble stove parts. AVOID touching new element as oil from hands will decrease the life of the element. Good Luck..
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout