Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This drain pump for your washer is designed to remove the dirty water during and after the washing cycle. If your washer has water left in it after its washing cycle is over, or if your washer is experiencing leaks around the drain pump, the pump may be damaged or bad and in need of replacement. Ensure you remove and test your drain pump with a multimeter before replacing it. Replacing this pump will require some disassembly of your washer. This pump is sold individually, and does not come with any wire harness or other accessories.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tzvi R - February 6, 2020
Verified Purchase
Drain pump
The pump we ordered by the model number was a perfect fit.
★★★★★
★★★★★
Heather B - June 22, 2018
Verified Purchase
Back in Business!
Thanks to YouTube I was able to figure out what was wrong with my washing machine and got it fixed. The part arrived quickly and was easy to install. I was back to washing clothes in under 30 minutes.
★★★★★
★★★★★
JEREMY L - October 31, 2022
Verified Purchase
Maytag drain pump
Part worked perfectly, and delivery was quick.
★★★★★
★★★★★
Steven T - September 20, 2021
Verified Purchase
Easy repair
Brand new pump went right in works like new
★★★★★
★★★★★
Mary W - September 28, 2020
Verified Purchase
So easy
I appreciate the support your site provides. I was a little intimidated at the thought of repairing my own washing machine but the comments and pictures that other customers was very helpful. I installed the pump and my machine is working!! Took me about 30 min in all. Thanks for having such a comprehensive site-you supply the part, at great price and the support to make it happen!!
★★★★★
★★★★★
Thea C - April 26, 2023
Verified Purchase
Easy repair
Part came fast, in great condition.
I installed it myself. Appliance is back in working order
★★★★★
★★★★★
Joe P - June 26, 2018
Verified Purchase
Water punp
Part was an exact replace . The instructions on how to replace was spot on. Took 25 minutes to replace
★★★★★
★★★★★
Donald H - March 12, 2025
Verified Purchase
Easy installation and has been working well for weeks now
The pump looked exactly like to old one. I installed the new pump and ran in washer through a cycle empty and all worked well, so I loaded it with clothes and started catching up on my laundry, Been a few weeks not and all is well
★★★★★
★★★★★
Leonard Z - August 13, 2020
Verified Purchase
It worked
Good
★★★★★
★★★★★
Jim H - June 27, 2023
Verified Purchase
Perfect fit for the washer. Works great!
Perfect fit! Works great!
< Prev
1
2
3
Next >
Installation Instructions
Average Repair Rating: 3.4 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer wasnt draining
Took the back cover off. Took screws off to pump. Replaced pump. Did everything reverse. Tested to make sure.
Stephen from Germantown, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain
Found helpful video on YouTube Unplugged washer and moved out from the wall leaving the drain hose intact Used vacuum pump to suck out water from front of washer (inserted hose inside front door gasket) Removed back cover Checked filter on old pump(clean on buttons, screws or missing jewelry) Positioned light a
... Read morend mirror inside to locate screws attaching pump Unplugged small wire as shown on video Used wrench and socket to remove bolt head screws Used adjustable wrench to release clamp on hose connector to the old pump Pulled out old pump wiped up small water drips Installed the new pump ordered and received from partselect Hardest part was inserting the far back screws and reversing the righty tightly mindset… P.S. washer is up and running great!
Read less
Patricia from TILLAMOOK, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench (Adjustable)
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Will not drain water.
!!!! Unplug washer and let sit for about 15 minutes before performing any repairs!!!! Remove back cover with 1/4 inch nut driver. Locate drain filter under drum and slowly remove cap to drain(it will help to catch the water that drains out with either a shallow bucket or a wet/dry shop vac). Disconnect single electrical connector on pump.
... Read more Locate and remove four mounting screws with 1/4 inch socket and ratchet. Remove pump and remove as much debris as possible. Install new pump with light amount of dish soap or other lubricant on o-ring seal. Tighten mounting screws. Connect electrical connector. Reinstall back cover.
Read less
Cory from AMERICAN FORK, UT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Suspected drain pump not working after checking filter and drain hose.
The top and back were already removed from front load washer. There is no lower front access panel on my washer. I followed a YouTube video that showed a similar washer model with a drain pump that looked exactly the same. This video had the washer up on a work bench for easier access. My washer is in a very tight space and the best I c
... Read moreould do was wiggle it out and set the rear corners on bed risers. There are 4 screws that take a nut driver to loosen. My nut driver was too long to fit. My sockets were too fat to fit. I took my socket handle and put on a smaller socket, then added a nut driver from a power drill. This made it short enough to fit. One screw was totally by braille. The pump came off easily. I lubed the gasket part of the new pump with liquid soap. It was difficult for me to push the new pump up, so I used a ball hammer to wedge it up bit by bit. I was able to twist the ball hammer head enough to keep the pump up while I put the screws back. The screws finished snugging everything up. Washer works great now! This was done by a grandmother and obviously not an appliance technician.
Read less
Norma from LAKEVIEW, OR
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F9 E1 error drain pump too long, filter was clear so pump failure
Disconnect water lines and drain lines, unplug unit. Remove top panel of washer to access the door release, one open remove any clothes and use the shop vac to capture water from the drum. Close the door after sucking up water. Move washer to access back panel and remove 1/4 screws. Lay washer on its side and disconnect th
... Read moree power supply to the pump. Remove the 4 bolts hold the pump to the unit. While removing the pump, use the shop vac to catch any remaining water in the washer. After old pump is removed place new pump in unit and attach bolts to secure the pump to the washer. Connect the electrical plug to the pump. Place the unit in the upright position and put the back panel back on the washer. Place the top panel back on the washer. Reconnect water lines and turn the water on. Connect drain line and plug unit in. Once unit is back in position. Turn on unit and wash as normal.
Read less
Richard from WEST CHESTER, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fault code said that the pump was pluged.
I pulled out the filter and it was not pugged so I ordered a new pump and installed it, easy to do. That took care of the fault code and it was repaired. Being who I am I took apart the old pump and found that the pump had a build up around the armature of the pump motor. I cleaned it up and reinstalled it and the old pump worked fine.
... Read more Now I have a spear pump for the next it fails. Easy repair that took less than 15 minuets to fix. Happy to deal with Parts Select they have great shipping.
Read less
Richard from MOUNTAIN HOME, AR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Kept getting drain error codes- drain pump was loud
An easy job- hardest part was moving the machine away from the wall - ours is stacked with dryer on top.
Once we pulled it away from the wall: 1) remove back cover with a screwdriver (I used a driver to make this easier) 2) unclamp the drain hose from drain pump and drain excess water into a shallow pan 3) unplug
... Read more the electrical connection from drain pump 4) use a wrench to remove the 4 hex screws holding the drain pump to the drum 5) pull down the drain pump from drum 6) repeat above in reverse to install new pump
Read less
Louis from WILTON, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
E1 F9 code. Cannot drain.
Removed back panel. Remove 4 8mm sockets on pump assembly. Replace with new pump. Only difficult because of limited clearance. But I'm huge.
Michael from WILLINGTON, CT
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error Code F01 E09 (Drain Issues)
Unplug appliance. Remove the back panel with the 1/4” nut driver and cordless drill. The pump is located as you face the back of the machine on the bottom. Remove four screws that hold pump in. Reverse the process and install new pump. Check the filter and clean out the housing. Reinstall back panel and plug back in. Run a test load
... Read more(no clothes) and test drain.
Read less
Jeff from LAKE STEVENS, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer not draining and door locked .. Loud buzzing
First, the repair manual is under the top cover. From the manual, I found that my problem E1 F0 (I think) was one of two possible issues, the drain pump or level switch. I bought both parts and replaced them and the issue is no more. The repair went very easy. You remove the rear cover and top. The pump is located in the bottom bay of the
... Read more machine. The only issue I had was that the machine had the drawer unit, which blocked the access panel under the machine and made installation and removal a little more difficult. The best way is to tilt the machine forward to reach the bolts, a small ratchet set works nicely. The level switch is on the right side, toward the rear. This part slides out, and the wires are keyed, so they only go in one way.
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
February 8, 2018
How do i access the drain pump
For model number MHW4300DW0
Hi Lawrence,
Thank you for your question. There is a video on our website that you can reference on how to install the drain pump. The washer in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS11757304. I hope this helps. Thank you and have a great day!
12 people found this helpful.
Did this question help you?
Thank you for voting!
Alec
June 26, 2022
Washer door is locked and making draining noise when I plug it back into outlet. Still holding water and won’t power on. Do I need to replace Drain pump?
For model number WFW75HEFW0
Hello Alec, Thank you for your inquiry. We have researched the model you have provided and although the door is locking, it may not be communicating to the control board that the washer is locked, so we would still recommend testing it. You can also test the drain pump with a multimeter to see if it is faulty. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
5 people found this helpful.
Did this question help you?
Thank you for voting!
Mike
December 7, 2022
The washer will stop at the draining point in the cycle and flash error E01 F09. I can turn off the machine but the door stays locked. Sometimes it will eventually drain on it's own and finally unlock. But the clothes will still be wet inside. Now when it flashes that error, I have to unplug the washer for 15mins or so, when I plug it back in, it will somethings still not work. I can hear it making a grinding clunky noise from the bottom. After unplugging and plugging it back in, it will eventually drain out and unlock the door. Last night after going through this whole process, I usually run the Drain & Spin cycle to get the water out of the clothes, but it wouldn't drain in that cycle either. It began to flash E03 F09. It eventually drained the water out but the clothes were still soaking wet.
For model number WFW75HEFW0
Hello Mike, thank you for the question. Based on our research, this error code appears when there is a long drain time, water overflow, or an issue with the pump. You may need to check the filter and drain hose for any kink and clog. If that is not the case, we would recommend replacing the water level switch, part number PS11754877, and the drain pump, part number PS11756700. Please reach out to customer service if you need help placing an order. Glad to be of help!
My previous question asked: Getting error message (E01/F09) at end of wash cycle and clothes seem wet like spin cycle did not complete running.
Your reply answer:
A whirlpool washer E1 or F9 error (FP with some models) means that the washer is taking too long to drain (typically, over 8 minutes). Our suggestion is to replace the drain pump PS11756700.
My next question: Do you have a video you can send that shows the repair procedure to take out and replace the drain pump. Also, my washer is a Maytag not a Whirlpool. However, I know Whirlpool owns Maytag but I just want to be sure I’m buying the correct part. Thanks
For model number MHW5500FW1
Hello Clark, thank you for the question According to our research, you may need to turn the washer on its side and remove the bottom plate. Then unplug the electrical lines and replace the drain pump. We hope this helps, good luck with this repair.
1 person found this helpful.
Did this question help you?
Thank you for voting!
Teresa
June 6, 2019
What is the white plastic part that fits around the pump motor called? It has the one outlet from washer to the outlet that goes to drain hose? Mine is cracked and i don’t need the motor, i just need that part. Thank you.
For model number NFW7200TW
Hello Teresa, Thank you for the question. This would be the pump housing and it is only sold as part of the drain pump. Hope this helps!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Daniel
August 21, 2019
I would like to know if they make two different size pumps for this washer
For model number wfw75hef washer
Good Day Daniel. Thank you for your question in regards to your unit. Based on our research the Drain Pump that shows is compatible with your unit can be found by searching on our website PartSelect Number PS11756700. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
1 person found this helpful.
Did this question help you?
Thank you for voting!
David
February 2, 2023
Is this part new
For model number part no. w10605427
Hi David, thank you for your question! Yes, this is a new part. PartSelect new and OEM parts. You will not see us describing parts as “refurbished”, “third party”, or “universal". We hope this information helps!
1 person found this helpful.
Did this question help you?
Thank you for voting!
David
March 7, 2023
HI I have a Maytag front load washer Model Number MHW7100DC. I need a pump for it. The pump has W10365896 on it but i can not find that number. Is there another number for this pump or which one would work
Thank you
Hi David, thank you for the question. According to our research, the part that is compatible with your model is part number PS11756700. We hope this helps!
Did this question help you?
Thank you for voting!
Michelle
August 25, 2023
Some of my model number has been worn off on my Maytag washer. I need a new drain pump but don't know which one to buy. Can you help?
For model number MHW5400 0
Hi Michelle, thank you for reaching out. Our research has found that part number PS11756700 should be the correct drain pump for your model. We hope this helps.
Did this question help you?
Thank you for voting!
Ken
October 10, 2023
Looking for a filter pump for this machine, anything is much appreciated.
For model number MHW3000BW2
Hello Ken, thank you for getting in touch. The compatible drain pump filter for your model is part number PS10061774. If you need help placing an order, customer service is open 7 days a week!
