Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
As per manufacturer this no longer comes with the Spacer.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kirk S - January 3, 2025
Verified Purchase
Easy motor repair...now my microwave platter spins again!
The motor arrived and looked like any other d.c. motor. It was just what I needed, as the old motor was working intermittently and making my microwave platter noisy, with a hitch in its giddy-up. It took about 10 minutes to access and remove the old motor, then install the new one. It worked great and has been successfully driving my microwave platter in circles for the past couple of weeks - my food tastes better than ever!
★★★★★
★★★★★
Ronald K - March 29, 2023
Verified Purchase
Did the job. Took a few minutes.
The turntable motor was shot. It clunked and hitched and spilled contents inside the microwave. For a tiny fraction of the cost of a new machine, and without the hassle of re-installing a built-in, this not-so-handyman was able to replace the motor. It only took a few minutes. A bunch of star-screws hold the cover on the bottom of the unit. The hardest part was working leaning over the stove to reach the motor, dismount the old, and remount the new. Smooth as glass operation now.
★★★★★
★★★★★
Jane H - October 24, 2022
Verified Purchase
Excellent
My son installed it in a few minutes, works great! Thank you
★★★★★
★★★★★
James H - December 3, 2022
Verified Purchase
Has worked perfectly
Came quickly. Well made.
★★★★★
★★★★★
Lurher F - July 27, 2023
Verified Purchase
Motor
the part was what I ordered and when it was installed it worked as it should. the motor was not hard to install and seems to be performing properly
★★★★★
★★★★★
Phillip V - September 29, 2021
Verified Purchase
Perfect!
Received, installed easy. Less than 20 minutes.
★★★★★
★★★★★
Luis L - October 29, 2021
Verified Purchase
Great experience.
I recieved the part quickly and installed it in fifteen minutes . All work fine .
★★★★★
★★★★★
Joseph B - April 25, 2023
Verified Purchase
Easy to change. Works great.
Two screws to change. No issues
★★★★★
★★★★★
Frederick G - December 4, 2018
Verified Purchase
Perfect Replacement Motor
Replacement microwave motor arrived on time and fit perfectly. It's been running as intended.
★★★★★
★★★★★
Michael C - July 4, 2022
Verified Purchase
Easy repair
All good. Will order from here again.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Turntable Motor burned out
Unplug microwave Remove bottom of Microwave with phillips screwdriver. Remove connecting wires to Motor Remove Motor (2 Screws) with Torx Wrench. Transfer seal from old motor to new moter Re-install motor Connect wires Reinstall Bottom of microwave Plug back into outlet
Turntable would click, pop, and jerk while running.
Unplug the microwave. Removed the glass tray, the roller ring, and plastic piece that sits on the motor shaft from the inside of the microwave. Remove the 12 Phillips head screws from the bottom of microwave, let the bottom hang down on the mounting hooks at the rear of the microwave. Remove the 2 torx screws from the mounting bracket und
... Read moreer the microwave lower the turntable motor remove the two leads. Transfer the rubber washer from the old motor to the new and reassemble and test. It took longer to write these instructions than it did to do the job.
Hint: if the microwave is over a stove lay a towel across the stove to catch any screws that may fall.
Good luck and enjoy your fully functional microwave!
Read less
Bryan from LAKEVILLE, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
NOISY TURNTABLE DRIVE MECHANISM
RATHER EASY. PHILIPS SCREWDRIVER, TORX DRIVER (FOR THE 2 SCREWS SECURING THE GEARMOTOR ITSELF), VERY SMALL SCREWDRIVER TO ASSIST IN DEPRESSING THE DETENTS ON ELECTRICAL CONNECTORS AT THE MOTOR. IF THE MICROWAVE IS ABOVE A STOVE UNIT, IT'S A GOOD IDEA TO PLACE A TOWEL DOWN ON THE STOVETOP TO CATCH ANY WAYWARD SCREW IF ONE HAPPENS TO GET
... Read moreAWAY. (VOICE OF EXPERIENCE)
Read less
Bevan from PACIFICA, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
turntable motor making clicking noise when turning
I unscrewed the bottom plate of microwave oven and took a picture of how the wiring was plugged in and unscrew the motor and put the new one in,it was so easy to do
Rene from BINGHAMTON, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rattling noise when turn table was in motion
Unplug any appliance before any work is done. The microwave is a hanging unit under kitchen cabinets. First I removed the turn table, rollers, and connector by lifting them out. Second I removed all the attaching Phillips head screws that hold the bottom cover on. Once removed the cover will hang and give access to the drive motor gear as
... Read moresembly. It's held in place by 2 torques head screws. Remove these, lower the motor, and disconnect the 2 wires that plug onto it. A small pick or similar tool is needed to release the connectors latches. reassemble in reverse.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marcia
February 20, 2020
Turntable turns very slow even with the door open and will not cancel. Will stop only when un-plugged. A code appeared on digital readout : Fie4. Thanks in advance for your assistance.
For model number WMH31017AS2
Hello Marcia, Thank you for the question. The F1E4 Error code indicates the Power Relay has failed the the Control Board, PartSelect Number PS11757034 will need to be replaced. We hope this helps.
Hi Harlan,
Thank you for your question. We provide our parts with a one year warranty. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mel
September 11, 2019
What microwave turntable motor do I purchase to replace a bad one for this particular model?
For model number KMHC319ESS0
Hi Mel,
Thank you for your question. The part number listed under your model number for the turntable motor is PS11755189. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jay
July 3, 2022
Does this turn table motor, (shown to fit a GMH3204XVB "2" model) ALSO FIT a GMH3204XVB-1?
For model number GMH3204XVB-1
Hello Jay, thank you for your question. Yes, the Motor PS11755189 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Jose
May 6, 2023
I bought the microwave (whirlpool) motor turn plate, but later fond out the motor works, but the tri-part plastic piece is broken,(where the plate seat to turn when activated), but don't know what part number is the piece.
For model number Part # WPW10466420
Hello Jose, thank you for your question. We believe you are looking for Drive Coupling PS3507976. We are pleased to have been able to help.
