This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this part. We recommend replacing both hinges at the same time. This model is roughly 9.5 inches long, f4 inches wide, and almost 1inch thick.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, Amana, Inglis.
Part# WPW10299224 replaces these:
AP6019072, W10299224
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.6
Filter By Rating:
5 Stars
12
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Barbara B - January 7, 2023
Verified Purchase
Part was the right one!
Took only a few minutes and my oven was back in working order! Fast shipping!Thank you!
★★★★★
★★★★★
Randy F - December 22, 2022
Verified Purchase
Worked like it was supposed to
It was a little more difficult to install than I was expecting due to the double glass and 2 panel thickness of the door. No issues coming apart. Used tape to hold side trim in place till I could get screws in place.
★★★★★
★★★★★
Rich D - October 27, 2022
Verified Purchase
Hinge neeeded for stove
The part worked just like new.
★★★★★
★★★★★
Christopher H - March 4, 2022
Verified Purchase
On time but wrong part
I received the door hinge without the spring. I thought it was my bad but after reviewing my order I see I did order the correct part, just received the wrong one. I went out and bought the correct one from my local appliance store. Its just easier to make sure your getting the right part when working with an actual person. Its also nice to support your local community.
March 9, 2022
Hi Christopher,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
★★★★★
★★★★★
RONALD W - September 26, 2021
Verified Purchase
Part was the right one
The part was the right one the first time . And when you are with out your stove you really need your part fast . Thanks guys
★★★★★
★★★★★
Howard B - August 9, 2021
Verified Purchase
Oven door hinge
Part received fast & appliance is back in working order. I think the part is very expensive. I don't think it is worth more tthan $20
★★★★★
★★★★★
Rafael Y - May 30, 2021
Verified Purchase
Great part
My oven is perfectly fine
★★★★★
★★★★★
Pam K D - May 6, 2021
Verified Purchase
Great. Fast service.
The part was great.
Need more info on how to install part in oven door.
★★★★★
★★★★★
Tonya L - April 14, 2021
Verified Purchase
Spring hinge to the rescue!
The exact part I needed to fix the appliance. Totally satisfied ??
★★★★★
★★★★★
Reno L - September 24, 2020
Verified Purchase
Easy repair and perfect replacement
My stove door closes amazingly now.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace Door Hinges
So glad I found the parts I needed! I followed the GREAT video instructions on this site and when I opened the oven door up discovered there had only been ONE spring inside this whole time! I replaced both springs & hinges easily, cleaned up the glass while I had the door off, and everything went right back into place!
Glenda from ROCK HILL, SC
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compressor would not shut off at the maximum recommended pressure (150psi)
Removed face plate (4 screws). Removed 2 screws holding manifold in place. Detached wires from the switch. No need to mark them - they don't have to go back on any particular terminal. Remove the switch from the manifold with an adjustable wrench. Replace with new switch (thread sealing compound on the new switch is sufficient - no need for teflon tape). Reattach wires and reassemble manifold and face plate. Easy fix!
Mark from SYLVA, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spring hinge
the door came apart fairly easy getting it all back together was another story lining up glass and panels that have already been heated was fun but its back together and working fine.... It should be noted that I have a warranty for the stove but the hoops I had to jump thru and the time it would take for the tech to come it was easier to do it myself!!
Ralph from TEATICKET, MA
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The hinge was mounted on the right . The screw to remove it got it's square head chewed up because of using the wrong ssize driver
I left the old broken hinge in place, & put the new hinge on the left side.
Howard from CROWNSVILLE, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinge fell apart
Watched a video first. The repair was easy.
myron from west salem, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven door hinge spring was broken and made the door heavy to open and close
I took the door off the oven frame by releasing the hinge latches and lifting and pulling the door outward to remove it . Then I removed the glass outer cover by taking off the philips screws and then unscrewed the door hinges . I then reversed the order to replace it .
Joseph from KENT, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Busted door hinge
Wrestled with it for ten minutes and then watched a youtube video on how to set the locks on the oven door hinges in order for the door to be installed. The video was instrumental
Robert from DEERING, NH
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Active spring broken
Removed the oven door listened to a video/You tube and the rest was easy.When you remove the door panels make sure all the parts are assembled correctly.
Angelo from NAPLES, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door wouldn't close.
Watched a video on you tube! When I ordered the hinge it was recomended to replace both hinges. so I ordered two hinges not knowing that one of the hinges didn't have a spring. I ended up with an extra hinge.
Dorothy from PORT ST LUCIE, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DOOR HINGE BROKEN, NOT SUPPORTING DOOR
Followed youtube instructions: lifted clips on door hinges, removed door. removed screws, removed rear cover, replaced right hinge. reassembled door. caution: door handle will fall off when top two screws are removed. Alignment of screws is some what difficult, requires awl. Replace door, return locking clips to forward position, check door for operation.
Charles from PAYETTE, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
8 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Diane
June 27, 2019
Do they come with 2 in pkg
For model number xfg510soa61
Hello Diane, thank you for your question. These parts are sold individually. Only one would come per package. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Kyle
December 3, 2017
Do the door hinges control how far i can open the door on this model? Right now the door is dead weight and only opens all the way or closes. No in between.
For model number WFG515S0ES0
Hi Kyle,
Thank you for your question. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, or it is opening and closing all the way, you may want to consider replacing this part. We recommend replacing both hinges at the same time. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
April 3, 2019
Door falls open “heavy” is the symptom described, will this fix it?
For model number WFE525C0BS0
Hello Chris, thank you for inquiring. Yes, the Door Hinge with Spring for your model is part PS11752376 and should fix that symptom.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nicolai
January 30, 2023
Does this part work for this model stove door
For model number Yaer6603sfs1
Hello Nicolai, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. The other hinge is part# PS11752379. We hope this helps with your repair.
Will this part fit my model? My right side hinge is bent door does not close all the way
For model number WFG525S0HS1
Hello Anthony, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11752376. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mariah
December 8, 2019
My oven door is clicking. Do I need to repair the full hinge? Or just reset the spring? Will I need any other tools?
For model number WFE510S0AS0
Hello Mariah, Thank you for the question. We suggest replacing the Hinge. Previous customers required a screw driver when replacing the Hinge. Hope this helps!
Was this helpful?
Thank you for voting!
Darlene
January 4, 2020
Will this part work for a broken hinge on a Amana self clean “the big oven capacity plus 5.1”
For model number Amana the big oven capacity plus 5.1
Hello Darlene and thank you for writing.
We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. Part #PS 11752376 might still work with your unit; however, as we do not have your model number in our database so we can not guarantee the fit. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Anne
November 2, 2021
I got a new spring hinge but the little hinge that opens and closes on this part is in a lock position and it won’t move. Will it move when I install the hinge or is there something wrong with it.
For model number WFE510S0AT0
Hello Anne, Thank you for the question. Once installed, you need to lift the clip so the Hinge can open and close. We hope this helps!
Was this helpful?
Thank you for voting!
Bob
December 15, 2021
Maytag gas range door falls all the way open, it looks like part #WPW10299224 will fix this problem. Is there any other parts I will need?
For model number HGR7685AW-1
Hello Bob, thank you for your question. Yes, the part you had chosen is compatible and should remedy the falling door issue. Thank you for writing.
Was this helpful?
Thank you for voting!
Gary
October 7, 2022
I have the schematic of the range. I know that the part that is broken is on the right side. W10299224 which has the spring. My question is is the hinge with spring only on the right side? Does the left side not have a spring? Another person indicated that was the case. I don't want to buy 2 spring hinges if only one side has a spring.
Thanks
For model number AER5630BAS0
Hey Gary, thank you for reaching out. We have researched your model and found that this part will fit both sides of the door. The left side does have a spring as well. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752376
Manufacturer Part Number: WPW10299224
