Adjuster - Left Side WPW10153533

Pulled the removable end caps off of the sliding track that the wheels roll on and then pulled the top tray out of the dishwasher (works like a sliding drawer in your kitchen). Removed a half dozen hex screws and threw out the old wheel housing. Set the new wheel housing and new wheels in its place and re-inserted the hex screws. Slid the ... Read more top tray back into the sliding track and re-inserted the end caps. Done.

I discerned the problem , went to this site , as I have done for other needed repair parts , Looked at the exploded view provided for the exact part I needed and ordered it .
The part came almost befor I even ordered it !
Actually it arrived two days after the evening I ordered it .
Very quick , given my experiences with ot ... Read more her misc. suppliers !

The original part was plastic. I kind of expected a $5 replacement part and not a preassembled unit. It was okay because the redesigned rack adjuster assembly was steel and will probably last forever. Worth the $40.

Shipped part arrived in 2 days. Pulled off 2 retainer clips, pulled out the rack, unscrewed 5 or 6 screws, used o ... Read more riginal adjuster, and had it all back together in about 10 minutes. Oops, I forgot to read the instructions, again.

Thanks for the fast service.

remomed old adjuster and attached the new one to the housing and it was done it was very simple

I had to remove rack, remove old assembly and replace with new part. The manufacturer has improved the replacement part, which leads me to believe I am not alone. I used a nut driver/ allen wrech to remove broken part and took about 10-15 mins to repair. Part arrived very fast, great service!

Our dishwasher broke just before the big Christmas dinner! We ordered the matching part from your website and rush delivered it. We then removed the old part with a screw driver and replaced it with the new part. It fit perfectly and the dishwasher was back in operation. Christmas was saved!
Thank you!

I removed the old rack adjuster by unscrewing four screws. I put the new rack adjuster in place, carefully fitted the adjustment parts together, then replaced the four screws. The best part of the repair was that Parts Select had originally indicated that my part would be on back order for a few weeks, but I actually received the part wit ... Read more hin just a few days. What a nice surprise - thanks!

remove several Torx-bit screws in upper assy, swap out the broken assy. for the new one.