EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Easy
Part Location Diagram of WPW10124269 Whirlpool Microwave Led Display Board
See part 4 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

customerservice@partselect.com

Microwave Led Display Board WPW10124269

 Fits your KBMS1454RWH0!
★★★★★
★★★★★
4 Reviews

Really Easy 

15 - 30 mins 

Rated by verified customers
$ Price Match
$ 132.20
  In Stock
Order now and your part arrives by May 3
 Fits your KBMS1454RWH0!
PartSelect Number PS11748663
Manufacturer Part Number WPW10124269
Manufactured by Whirlpool for KitchenAid, Whirlpool
Product Description

Microwave Led Display Board Specifications

This electronic control board serves as the central command unit for microwave operation, managing key functions such as cooking time, power levels, and defrost cycles. It receives input from the user interface and internal sensors, then coordinates the appliance’s performance by sending signals to various components. The board also drives the LED display, providing clear visibility of selected settings and status indicators. This genuine OEM part is designed to replace a malfunctioning or unresponsive control board and should be installed by a qualified technician due to the presence of high-voltage components within the microwave.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Why buy the real thing?

OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.

  • OEM from PartSelect
  • Genuine brand name
  • Guaranteed to fit
  • Superior quality and durability
  • 1 year warranty
  • Generic
  • Unknown manufacturer
  • No fit guarantee
  • Inconsistent quality and lifespan
  • Limited warranty and support
You May Also Need ?
Troubleshooting
This part works with the following products:
  • Microwave
Part# WPW10124269 replaces these:
8205663, W10124269
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Installation Instructions
 Average Repair Rating: 4.4 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
The LED display on the microwave was no longer functional. Some lights still showed, but not enough to be able to tell the time or validate timer settings.
1) Identified the breaker that the microwave was connected to and turned it off.
2) Removed the four screws holding the extension kit to the microwave (easily visible on the front of the microwave) and removed the side panels (required sliding the panels up and off).
3) Removed the six screws holding the microwave to the cabinet (exposed after removing the extension kit)
4) Slide the microwave out and unplugged the cord from the outlet
5) Removed the screws that secured the front display panel to the microwave. These are located on the side of the microwave just behind the display panel. There are a total of 4 screws, 2 on each side. Additionally there was a clip holding the front panel on. We were able to press down to get it to release. NOTE: You will not be able to fully remove the panel as there are cables that run back to the board which is only reachable by removing the top panel
6) Removed the screws along the sides. back, and top to remove the top panel (there are 3 screws on each side and 2-3 in the back, there is only one screw on the top near the back right that holds the top to a part inside the microwave.
7) Peeled the top off of the microwave - there is a line of double sided tape that held the front of the top panel to the back of piece where the front display panel was mounted.
8) Carefully remove the existing LED Display Board. There is a single plastic clip that you have to very gently press back to slide the LED out. We were not careful enough and the clip broke. It did not hinder the replacement and even without the small plastic bit the LED board sat snuggly in its spot.
9) Trace the cable from the LED board back to the circuit board and unplug the cable. We pulled the cable out through the front of the microwave as the hole from the front display panel back to the board was just slightly too small to fit the board through.
10) The new LED panel arrived with extra boards attached to it. There were clear spots where the boards were perforated to easily snap off.
11) Thread the new cable from the front of the microwave through the hole and plug in where you removed the previous cable
12) Seat the LED Display Board in the slot.
13) Replace the top of the microwave and the associated screws (we used four small bowls to separate the screws for the top of the microwave, screws for the front of the microwave, screws for mounting the microwave, and screws for the expansion kit)
14) Reseat the front panel and replace screws
15) Plug microwave back in. (We took this opportunity to turn the breaker back on to test and make sure everything was working before we remounted the microwave)
16) Place microwave back in its mount and secure with mounting screws
17) Replace the extension kit if applicable and its associated screws.
  • Krystal from YORK, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748663
Manufacturer Part Number: WPW10124269
Brand
Model Number
Description
Whirlpool
IBMS1450VM0
Microwave
Whirlpool
IBMS1450VMS0
Microwave - Built-in
Whirlpool
IBMS1450WM0
Microwave - Built-in
Whirlpool
IBMS1455VS0
Microwave - Built-in
Whirlpool
IBMS1455VW0
Microwave - Built-in
KitchenAid
KBMS1454BBL0
Microwave
KitchenAid
KBMS1454BSS0
Microwave
KitchenAid
KBMS1454BWH0
Microwave
KitchenAid
KBMS1454RBL0
Microwave
KitchenAid
KBMS1454RBT0
Microwave
KitchenAid
KBMS1454RSS0
Microwave
KitchenAid
KBMS1454RWH0
Microwave
KitchenAid
KBMS1454SBL0
Microwave
KitchenAid
KBMS1454SBL1
Microwave
KitchenAid
KBMS1454SBL2
Microwave
KitchenAid
KBMS1454SBT0
Microwave
KitchenAid
KBMS1454SBT1
Microwave
KitchenAid
KBMS1454SBT2
Microwave
KitchenAid
KBMS1454SSS0
Microwave
KitchenAid
KBMS1454SSS1
Microwave
KitchenAid
KBMS1454SSS2
Microwave
KitchenAid
KBMS1454SSS3
Microwave
KitchenAid
KBMS1454SWH0
Microwave
KitchenAid
KBMS1454SWH1
Microwave
KitchenAid
KBMS1454SWH2
Microwave
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

Contact Customer Service