Range Spark Switches And Harness Assembly WP9755451

The replacement wiring harness arrived earlier than expected - good news. Once at the stove, I began the process of dismantling the range controls, but as no instructions were included with the part, this task was more time consuming than it needed to be. Nonetheless, I was able to remove the original harness. Next, I removed the repla ... Read more cement harness from it's shipping box to begin the installation. However, I quickly discovered that the wiring (both wires) had separated between the second block/pot and the third. From visual inspection, it appeared that the copper had simply broken off inside the block/pot. I did install the new harness to see if it would at least provide spark to ignite the two leftmost burners - it did. So at least 2 of the 4 burners will now light without using a match. I've ordered another replacement harness in the hopes that it's not defective, too. Partselect.com was quick to send a shipping label for the return of the first replacement and has promised a refund for the defective harness once it's returned.

Received the New Spark Harness with in 2 days after ordering from Parts - Select !!! And had intstalled in 15 minutes

I had to remove the oven control panel to expose the ignitors. I had to remove the ignitors py pulling on each one then disconnecting them from the conectore. I reversed the order to replace them.