This blower wheel is for dryers and attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Maytag, Whirlpool, Kenmore.
Part# WP8544737 replaces these:
8544737
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The fan wheel had a blade break off, my bad.
I went on the site and found the part I needed and then watched the video explaining how to dismantle, replace the part, and put the dryer back together. It was easy, especially with the video instructions.
Terry from ETTERS, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
March 6, 2018
When dryer is running, the wheel is not spinning. Dryer get hot but takes too long to dry. Seems that the dryer is not pushing out moisture. Would it be because this part is not operating? Does not seem to be a motorized part. Lint is also building up.
For model number MEDB200VQ0
Hi Robert,
Thank you for your question. If the blower wheel is not spinning when the dryer is running, then I would check to make sure it is correctly fastened to the motor. Also check the motor to see if it is running correctly. You will also need to check the blower belt, the internal bias thermostat and the electrode sensor to verify if they are working correctly as well. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
