This part controls the door lock mechanisms. The main board is sold separately.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Wall Oven, Microwave Oven Combo.
Part# WP8301848 replaces these:
AP6012630, 8301848
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven did not work & display was dead
Removed upper oven panel above oven door,removed back cover & replaced electonic control panel. Everything works again
Christy from Thornton, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven had no functions
removed double oven from wall removed cover from electronic cover and replaced part. realitivity simple repair
lawrence from dixon, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
14 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
November 21, 2019
I keep getting an E6 F2 error code on my Whirlpool stack double oven. Looking for the electronic control circuit board...maybe?
For model number RBD306PDB14
Hi Jason,
Thank you for your question. The E6-F2 error code indicates a problem with the touchpad or the electronic oven control. Sometimes unplugging the oven will help reset it and clear the code. If it does not, to test the oven you would need to remove the control panel and disconnect the ribbon connector from the touchpad to the oven control at the oven control. Clean the end of the ribbon and reconnect it. This will sometimes correct the problem. If the error code comes back, you will need to replace the control panel with touchpad. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Matt
December 9, 2019
We had a technician come out and look at our Whirlpool double wall oven because the display was out and the oven would not turn on. The lights did but nothing else was working. He serviced it and said it wasn't fixable because it need a main control board.This is exactly what he wrote in his notes: blank display. needs main control board. part is no longer available. unable to fix.
any help would be appreciated. thanks
For model number GBD307PRS01
Hello Matt and thanks for writing.
Main control board # PS11745841 is in the list of compatible items for your model. Hope this helps. Please contact us anytime.
Have you tried a hard reset for your board? Meaning go to your panel fuse box find the breaker for your oven and flip it to off wait 60 seconds and turn it back on. Sometimes that helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Emer
November 29, 2019
The control panel(top) has intermittent display problem. If today has display then the next day will have no display and if this happens, i cannot use the oven but i can use the microwave, just by pressing add minute button and press start. Please help.
For model number GMC275PDQ07
Good Day Emer. Thank you for your question in regards to your unit (Model Number GMC275PDQ07). Based on our research you may need to replace the control board on your unit (PartSelect Number PS11745841). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Courtney
January 29, 2022
My built in double oven control panel cuts off after about 5 minutes of cook time, and then the oven cools down. Is there trouble shooting for this or does the circuit board need to be replaced? Sometimes it will give me a few beeps (I assume representing an error, but the control panel has gone blank so I cannot see the error). Thanks!
For model number rbd305pvs02
Hello Courtney, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the high limit thermostat, the temperature sensor, the membrane switch/touchpad, and the wiring. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Our double oven blew the circuit board. Our repairman told us the circuit board needs replacement. Do you have that part for sale? Is the control board the same as a circuit board? This oven is a 2012 model.
For model number RBD305PVS02
Hello Nancy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3489085. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
My oven quit working, repair guy came and said that the "mother board" was the problem, it quit working and that we would have to buy a new double oven. I hardly use the oven perhaps twice a month. We bought it 12 years ago and it's just my husband & me. Help!
For model number RBD275PRQ00
Hello Elisa,
Thank you for your question. If all you need is to replace the mother board, the control board for your model is under part PS11745841. Hope this helps!
Was this helpful?
Thank you for voting!
Elisa
November 11, 2019
I am ordering ps11745841 (control board), how do i install it?
For model number RBD275PRQ00
Hello Elisa, thank you for your question. Other customers have advised that the unit is pulled from the wall, the front cover is removed and the board replaced. I hope this helps!
Was this helpful?
Thank you for voting!
Helen
November 15, 2019
Display and oven will not start. What part/parts do i need and what are the part numbers that will work with this model.
For model number RBD245PDT14
Hi Helen, please read our guide: https://www.partselect.com/Repair/Range-Stove-Oven/Will-Not-Start/ . Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Russell
November 17, 2019
I have an older Whirlpool wall mount double oven model above...there is no light on the panel but when you press a button you get 2 beeps followed by 3 beeps..this has happened before and we replaced the circuit board...i can’t find that part for this oven anymore can anyone point me in the right direction?
For model number GBD277PDS09
Hello Russell and thanks for writing.
The control board Part Number: PS11745841 is in the list of compatible items for your model. We hope this helps. Please contact us anytime. We hope this helps. Please contact us anytime
