Oven Sensor WP74008369 | Official Whirlpool Part | Fast Shipping | PartSelect
Oven Sensor – Part Number: WP74008369
Oven Sensor – Part Number: WP74008369 https://partselectcom.azureedge.net/Schematics/Maytag/55330.gif

Oven Sensor

PartSelect Number PS11744233

Manufacturer Part Number WP74008369

Manufactured by Whirlpool

Product Description

Oven Sensor Specifications

This sensor detects the temperature within the oven cavity.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Little to no heat when baking

This part works with the following products:

Wall Oven, Microwave, Microwave Oven Combo.

This part works with the following brands:

Jenn-Air, Whirlpool, Maytag, KitchenAid.

Part # WP74008369 replaces these:

74008369, 7430P043-60, AP6011040.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 5 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Alan from Wallkill, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Parts Used:
WP74008369
oven temp wrong
Remove the oven door. Remove 3 self tappers on rear wall of oven to take off a round access panel. Pull out a pre-cut rectangle of insulation. Next I removed the 2 screws holding the sensor in place. Pulling the sensor out a bit told me I was "touching" the correct wires in the SMALL rectangular opening. The wires are not visable and 2 hands do not fit in this small opening.I looked at the NEW sensor to see the release on the sensor plug. Slip the angled needle nose into the opening and grasp the plug/release side. The plug pulled apart easily. The sensor wire pulls out with a little bit of twisting to fit it out the hole. The new plug pushes in and has to be worked down to where you can reach it. The same angled plier works to re-attach it. It takes longer to read this than to do the job. Best of luck, Al
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
patrick from Colleyville, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP74008369
Sensor went out after fire in oven fault code 1b11
I removed the 2 screws holding the sensor in the back of the oven and pulled the wires out. The connector got hung up in the insulation. Rather than pulling too hard, I loosened up the heating element plate and screws and pulled the whole plate out an inch or so so I could work the connector through the insulation. I forgot to shut off the power. When I put the sensor on, I got the same error. I briefly shut off the power at the breaker and turned it back on. The clock on the oven did not reset. It still didn't work. So I took the whole thing out, shut off the power, reconnected it, turned the power back on, reset the clock, and it worked! Should have turned the power off first and I wouldn't have had to do it twice.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
dan from Gallatin, TN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Parts Used:
WP74008369
oven had error messages
I tryed to remove the sensor from the oven by removing the screws inside the oven. Unfortunatly, the plug for the sensor would not reach the inside of the oven. I had to remove the oven from the wall and remove the back cover to ac3ess the sensor wiring.
After that it was a snap.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
JULIE from SPOKANE VLY, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WP74008369
Water spilled in oven shorted out the sensor-code 3D21 I think
Didn't need sensor replaced. After turning the breaker switch back on oven appeared to be working fine.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Lee from FORT WORTH, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Parts Used:
WP74008369
Temp Sensor not working - Oven Overheating
If doing this for the first time, it's harder to replace than described by others.

Start by removing the oven door. Reach in to unscrew the two screws that hold the sensor in place on the back wall of the oven. I was working on the upper oven of a double wall oven and found it more comfortable to sit on a tall bar stool while working. Pull the sensor partially out and you will see the connector wire running through the sensor opening. The sensor connector plug is too deep into the oven to reach with fingers or any tool. Next unscrew the 6" round heat circulator fan just below the sensor on the back wall of the oven. Pull the fan partially out and you will see the plug for the temp sensor directly behind. You may have to push some of the insulation of out of way. Unplug the old sensor and pull it back out directly through the sensor opening. Take the new sensor and thread it in through the opening and plug it in. Reinstall the circulator fan and then screw the new sensor in place. This should complete the temp sensor replacement.
1 person found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11744233
Manufacturer Part Number: WP74008369
Brand
Model Number
Description
Jenn-Air
JJW2327WB00
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2327WS00
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2330WB00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2330WS00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2330WS01
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WB00
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WB01
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WB02
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WS00
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WS01
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WS02
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2427WW00
Wall Oven - 27" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WB00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WB01
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WB02
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WP00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WP01
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WP02
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WR00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WR01
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WR02
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WS00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WS01
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WS02
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WW00
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WW01
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2430WW02
Wall Oven - 30" BUILT-IN ELECTRIC OVEN
Jenn-Air
JJW2527WB00
Wall Oven - BUILT-IN ELECTRIC DOUBLE WALL OVEN
Jenn-Air
JJW2527WS00
Wall Oven - BUILT-IN ELECTRIC DOUBLE WALL OVEN
Jenn-Air
JJW2527WS01
Wall Oven - 27" BUILT-IN ELECTRIC DOUBLE WALL OVEN