Maytag/Maytag_Thumb/7689.gif
See part 15 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Surface Burner - 8 Inch - 2600W

★★★★★
★★★★★
15 Reviews
$ 33.24   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11743367
Manufacturer Part Number WP660533
Manufactured by Whirlpool
Product Description

Surface Burner - 8 Inch - 2600W Specifications

The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo, Dryer.
This part works with the following products:
Whirlpool, Maytag, Roper, KitchenAid.
Part# WP660533 replaces these:
AP6010190, 14200721, 14210015, 241419, 241420, 241598, 241743, 244013, 244032, 244063, 244064, 244147, 256702, 256703, 256704, 256705, 256706, 256707, 258898, 263462 ... Show more , 268105, 308379, 308380, 309185, 309186, 309214, 309215, 309216, 309340, 312559, 312560, 313963, 313965, 313966, 3195918, 3196205, 4163771, 4164322, 4165352, 4167352, 4167353, 4170120, 4170125, 4179292, 42127, 4315240, 4315583, 4320500, 4322741, 4327929, 4327935, 4328811, 4332689, 4332693, 4332742, 4332859, 4334586, 4334587, 4334588, 4351719, 4352140, 4352631, 4352711, 4353017, 4354325, 4354326, 4354410, 4371354, 4371948, 4372159, 4372608, 4378607, 4389732, 660530, 660531, 660533, 660533BULK, 74-06-138, 74-06-217, 786185, 816007, 865692, 865696, 866445, 866447, 868449, 868591, 877983, 877984, 878402, 879066, FSP660533, WP660533VP, Y71853 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Allen
    December 11, 2018
    I want to order a 8 in. Burner 3350 watt. Yours say 2600watt.Do you have a 3350 watt burner
    For model number RCK 986
    Hello Allen, thank you for your question. Unfortunately, we only have two elements listed for this unit. The large element PartSelect Number: PS11743367, and the small element PartSelect Number: PS11743366. I hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Juli
    February 20, 2018
    Anytime i try to find a replacement 8-inch element for the above model, it says there isn't such a model. The label and guide book both show rf4700xew7. What part number would fit. The label says it was manufactured in 2002 and is 40 inches wide.
    For model number RF4700XEW7
    Hello Juli, thank you for your question. The Surface Burner for your unit is part number WP660533. This will work with your specific model. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.6 / 5.0, 40 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      8 inch burner wouldn't come on. Wires shorted out
      One screw holds the block onto the stove top. Had to clean out fitting for phillips screwdriver or screw would have stripped because it was old with lots of buildup. Even cleaned out, this screw required great force with phillips screwdriver to keep from stripping. Caution! If you strip it, you'll have to drill it out! The rest was a snap. Cut the old wires leading to the old block (not too close to where wires disappear into back of stove, though!). Strip insulation off both wires and attach with the connectors that came in the kit. Then push the wires into the block, and finally, attach the block back to the stove top (new screw is supplied). Restore power and everything should be fine. One problem: Roper/Whirlpool built their appliance in such a way that when the connector block shorts out, it usually takes the infinite switch with it. So I ended up having to go back and purchase that switch as well (which just so happens to cost twice to three times as much!). If you put it all back together and it still doesn't work, that's probably what happened, so go ahead and remove the knob panel and check that switch (it's right behind the control knobs on the front). You will probably find a burned connector at the back top left or the switch. Don't forget to write down which wire goes where (or just take a picture of it).
      • Jonathan from Lilburn, GA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WP660533, 330031
      59 of 70 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      1 had 2 large burners not working at all, and was cooking everything on the 2 smaller burners
      It was so simple to repair - all I had to do was slide the older burners out and slide the new ones in - it took less than 10 min to complete the whole job! No tools used at all.
      • Mary from Lebanon, CT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        WP660533, WP660532
      23 of 25 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Receptacle burned out, due to short
      This was the second repair of the same problem. I realized this time that there was a poor connection between the burner and the receptacle causing a arch, creating extra heat and burning out the receptacle.
      All that I had to do was to cut two wires to the existing receptacle assembly and use the wire nuts to connect the new assembly and one philips screw holds it in place...The kit required me to assemble it first and there were four items to put together. No problem....
      • Rolland from Walla Walla, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        814399, WP660533
      15 of 19 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Burner was arching or not heating up.
      I followed the instructions on removing the existing burner, recepticle, and section of wire. Then followed same instructions for reinstalling above new parts. The instructions were simple and straight forward. The only gluich was that I had to drill out the rivets holding in the old hold down clips. I drilled these out with an 1/8" bit on the burner side off the opening.
      • Scott from Pleasant Valley, CT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        814103, WP660533, 330031
      12 of 15 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Original burners were not working correctly.
      I received my ordered in less than a week. It was great. The day I got them I remove the old burners and replaced them with the new ones. It took me about 3 minutes total. I was then able to cook my Christmas dinner with out any problems.
      • Sharon from Phoenix, AZ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
      • Parts Used:
        WP660533, WP660532
      10 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      heating element and socket needed to be replaced
      It was very easy, the element is held in place by a point that protrudes from the element's frame through a hole in the stove top. This hole is located directly across from the electrical socket your bheating element plugs into, under the stove top. Push the heating element in towards the socket and the heating element can now be lifted up and out of the burner tray. Remove the burner's reflector tray. Remove the single screw securing the elements electrical socket to the stove top. Lift the stove top up and secure. Remove socket and cut wires about 4 inces from the old socket. place shrink wrap over each wire and wire nut new socket to existing wires. place shrink wrap over wire nuts and heat to secure. reverse proceedure and test.
      • Steve from Mount Carmel, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        814399, WP660533
      9 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Cooktop Elements Worked Intermittantly.
      Turn the power off to the unit. Remove the cold element by lifting up and pulling out. Remove the drip pan. Remove the element plug screw and pull the plug up and out of the socket. Cut the leads to the plug as close to the plug end as possible to allow enough wire to splice the new plug in. Strip the insullation back 3/8" to allow for splicing. Install the shrink tube collar on the wire and place one new lead (prestripped at the factory)next to the old wire and place the wire nut provided over the bare wire ends and twist it on until it is tight. Bend the wire nut splice back over one of the leads and slide the shrink tape over it. Heat up the shrink tape with a hair dryer to make it tight over the wire nut connection. Repeat the process for the next lead. Slide the leads into the new socket. Install the socket and secure the the new screw provided. Reinstall the drip pan and plug in the heat element. Follow the same procedure for each element socket replaced. Turn the power back on.
      7 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Sparking Burner
      Followed instructions from previous repair story!!
      Pulled old burner out. Unscrewed plug element. Cut old wires back about 6 inches from plug. Attached new part with wire nuts provided and covered with shrink sleeves provided. Attached plug with provided screw and slipped in new element. Works great!!
      I want to thank the previous posters for posting their detailed repair stories....without reading those, I may have called a repair service and paid big bucks. Thanks to all previous posters for the detailed information they provided!! PS...The parts arrived in amazingly quick!!
      • Patti from Burbana, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WP660533, 330031
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      i used a pot that was too heavy and it broke my burner
      plugged element into the plugin
      5 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Intermittant heating, arcing in the socket
      Simple to do. Remove old element, remove screw holding socket, cut the socket wires with 2 inches to spare, assemble the newsocket and wires with heat shrink tubing, strip range wires, apply the wire nuts as instructed and shrink the tubning with a heat gun.

      Screw on the socket to the range. Shut the lid and install the element.

      The replacemnet screw is thicker than the original one, so you might want to drill out the hole very slightly. I did not but the resistance was high on getting the screw fully seated.

      Works great
      • David from Jefferson Hills, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP660533, 330031
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      15 Reviews
      4.9
      Filter By Rating:
      • 5 Stars
        14
      • 4 Stars
        0
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11743367
      Manufacturer Part Number: WP660533
      Brand
      Model Number
      Description
      Roper
      2222A00
      Range - Roper Range/Stove/Oven Model 2222A00 Parts
      Roper
      2222A1A
      Range - Roper Range/Stove/Oven Model 2222A1A Parts
      Roper
      2222A2A
      Range - Roper Range/Stove/Oven Model 2222A2A Parts
      Roper
      2222C00
      Range - Roper Range/Stove/Oven Model 2222C00 Parts
      Roper
      2222C1A
      Range - Roper Range/Stove/Oven Model 2222C1A Parts
      Roper
      2222C2A
      Range - Roper Range/Stove/Oven Model 2222C2A Parts
      Roper
      2222H00
      Range - Roper Range/Stove/Oven Model 2222H00 Parts
      Roper
      2222H1A
      Range - Roper Range/Stove/Oven Model 2222H1A Parts
      Roper
      2222H2A
      Range - Roper Range/Stove/Oven Model 2222H2A Parts
      Roper
      2222L00
      Range - Roper Range/Stove/Oven Model 2222L00 Parts
      Roper
      2222L1A
      Range - Roper Range/Stove/Oven Model 2222L1A Parts
      Roper
      2222L2A
      Range - Roper Range/Stove/Oven Model 2222L2A Parts
      Roper
      2222W2A
      Range - Roper Range/Stove/Oven Model 2222W2A Parts
      Kenmore
      22313
      Range - Kenmore Range/Stove/Oven Model 22313(1988) Parts
      Roper
      2242H00
      Range - Roper Range/Stove/Oven Model 2242H00 Parts
      Roper
      2242L00
      Range - Roper Range/Stove/Oven Model 2242L00 Parts
      Roper
      2362X0A
      Range - Roper Range/Stove/Oven Model 2362X0A Parts
      Roper
      2362X1A
      Range - Roper Range/Stove/Oven Model 2362X1A Parts
      Roper
      2362X2A
      Range - Roper Range/Stove/Oven Model 2362X2A Parts
      Whirlpool
      2392A20
      Range - Whirlpool Range/Stove/Oven Model 2392A20 Parts
      Whirlpool
      2392C20
      Range - Whirlpool Range/Stove/Oven Model 2392C20 Parts
      Whirlpool
      2392H20
      Range - Whirlpool Range/Stove/Oven Model 2392H20 Parts
      Whirlpool
      2392W20
      Range - Whirlpool Range/Stove/Oven Model 2392W20 Parts
      Maytag
      258B-2CXW
      Range - Maytag Range/Stove/Oven Model 258B-2CXW (258B2CXW, 258B 2CXW) Parts
      Maytag
      26AA-6CLX
      Range - Maytag Range/Stove/Oven Model 26AA-6CLX (26AA6CLX, 26AA 6CLX) Parts
      Roper
      2848A00
      Range - Roper Range/Stove/Oven Model 2848A00 Parts
      Roper
      2848A10
      Range - Roper Range/Stove/Oven Model 2848A10 Parts
      Roper
      2848C00
      Range - Roper Range/Stove/Oven Model 2848C00 Parts
      Roper
      2848C10
      Range - Roper Range/Stove/Oven Model 2848C10 Parts
      Roper
      2848H00
      Range - Roper Range/Stove/Oven Model 2848H00 Parts

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service