Quick Question!

Have you ever purchased from PartSelect.com before?

11743015-1-S-Whirlpool-WP6-2008160-Motor Pulley
11743015-1-S-Whirlpool-WP6-2008160-Motor Pulley 11743015-2-S-Whirlpool-WP6-2008160-Motor Pulley 11743015-3-S-Whirlpool-WP6-2008160-Motor Pulley https://www.partselect.com/Schematics/Maytag/37314.gif

Motor Pulley

Your Price

$27.43
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11743015
Manufacturer Part Number WP6-2008160
Manufactured by Whirlpool

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

This part works with the following brands: Maytag, Jenn-Air, International.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Will not drain.
  • Noisy.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

Second time asking - recommended that we check the water pump. Disconnected the belt for the water pump and still had noise. We change belts, bearing and tub seal. Still having whining noise that comes from base of the unit. Possibly the motor or base?

Doug for model number LAT2600AAE
Answer:

Hi Doug, Thank you for your question. Those parts could definitely be part of the issue but I would suggest checking the belt, tub bearing kit, glide and spring kit, and your damper pad kit as well. All of these parts would be physical, so you should be able to see if they have worn down. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 5 reviews What's this?
1-5 of 5
 

23 of 30 people found this instruction helpful

Parts Used:
  • Motor Pulley
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Wrench (Adjustable)
Customer: Robert from Menomonee Falls, WI

The water didn't pump out during the spin cycle

I took out the two screws in the bottom front panel of the washer, and rotated the front panel from the bottom away from the machine until the top or the panel was released from the machine frame. I then tilted the washer back to get access to the bottom of the machine. The pump pulley had split in half, and the bottom half fell off the drive motor shaft. The only problem I had was breaking free the set screw that holds the pulley to the drive motor shaft. I used a long arm Allen wrench and an adjustable "Cresent" wrench to apply enough force to break the set screw loose. Iclamped the upper transmission belts tightly to keep the motor shaft from turning while I loosened the set screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Franz from Lakeland, FL

No water drain

removed old pully, put new one on with hex driver, removed belts, put new belts on and finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 8 people found this instruction helpful

Parts Used:
  • Motor Pulley
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Xuanbao from Norwalk, CA

The washing machine ran noisily

Remove the power cord and water hoses. Lay the machine on the floor. Remove two belts (washing and pumping). Unlock the screw of pulley using a hex key. Remove the broken pulley from the motor. Place in the new pulley. Lock the screw of the pulley. Install two belts. Turn the machine vertically. Plug in water hoses and power cord. Level the machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Motor Pulley
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: curtis from ROCKDALE, TX

Noise from dryer in spin cycle,

Found noise to be belt slapping the base sheet metal, from being too loose. Belt was loose because the drive pulley was worn and one side of pulley was loose! Used allen wrench to loosen the pulley set screw, and pryed off the old pulley. Replace d with new pulley and new belts. Works and sounds like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Peter from Westhampton Beach, NY

Pulley came apart , frayed belt.

Tilted washer on its side.Took off old pulley- Allen wrench. Slipped on new pulley and replaced both the drive belt and pump belt. Works like new again- maybe for another 29 years!!! ???

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11743015
Manufacturer Part Number: WP6-2008160
Brand Model Number Description
MaytagA100SWasher - Top Loading
MaytagA101Washer - Top Loading
MaytagA102Washer - Top Loading
MaytagA102SWasher - Top Loading
MaytagA103Washer - Top Loading
MaytagA103SWasher - Top Loading
MaytagA104Washer - Top Loading
MaytagA105Washer - Top Loading
MaytagA106Washer - Top Loading
MaytagA106SWasher - Residential
MaytagA107Washer - Top Loading
MaytagA107SWasher - Residential
MaytagA108Washer - Top Loading
MaytagA108SWasher - Residential
MaytagA110Washer - Top Loading
MaytagA112Washer - Top Loading
MaytagA15CAWasher
MaytagA15CMWasher
MaytagA15CTWasher
MaytagA16CAWasher
MaytagA16CMWasher
MaytagA16CTWasher
MaytagA17CAWasher
MaytagA17CMWasher
MaytagA17CTWasher
MaytagA180Washer - Top Loading
MaytagA181Washer - Top Loading
MaytagA182Washer - Top Loading
MaytagA183Washer - Top Loading
MaytagA18CAWasher