Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles R - December 25, 2018
Verified Purchase
Works Great
The part came as expected( 4 days later) and worked really well. Me being color blind, I did have to ask my wife about the color of one wire. Violet. I assembled it and it works fine. I hope it lasts as long as the original. Thank you.
Charles
★★★★★
★★★★★
David B - December 2, 2020
Verified Purchase
Easy Repair, works great.
Whirlpool timer replacement, dryer has easy to access panel, replace wires one at a time, works great, cheaper than a new dryer.
★★★★★
★★★★★
Thomas R M - November 14, 2018
Verified Purchase
Easy dryer repair plug and played as expected
Timer fit exactly in the defective worn out timers place. The Gas drier is back in operation for another 10 years at least.
Thank you for stocking appliance parts.
Tom
★★★★★
★★★★★
Ross L - July 18, 2019
Verified Purchase
The right part.
This is an expensive part but I saved 40 - 50 bucks getting here, that was worth the 3 day's wait. Identical to the part replacing change out easy, one wire at a time. Works great.
★★★★★
★★★★★
Mark F - October 20, 2018
Verified Purchase
Easy repair. Simple install.
Fit perfectly.
★★★★★
★★★★★
Matt V - July 23, 2019
Verified Purchase
Whirlpool Dryer Timer
Part was exactly as described. Fast install and works great! Thank you Parts Select.
★★★★★
★★★★★
Francine S - July 23, 2019
Verified Purchase
Timer for dryer
Thanks
★★★★★
★★★★★
THOMAS T - June 26, 2020
Verified Purchase
Maytag dryer timer
The dryer timer was relatively easy to install and works perfectly.
★★★★★
★★★★★
John P - July 10, 2018
Verified Purchase
Easy Repair - better, it works on my 12-year old Maytag. Go USA.
Timer was brand new. Mint condition. I likely saved twice the price of the part buying it from Parts Select and installing it myself. Will not hesitate to shop and buy here again.
★★★★★
★★★★★
Dale E - June 10, 2021
Verified Purchase
that one fit
thats the one for my model.
< Prev
1
Next >
Installation Instructions
Average Repair Rating: 4.1 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
would not work
removed timer and installed new one. no instruction received.
Dale from PAOLA, KS
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer would not start and the timer would not advance
After disconnecting the dryer and removing the upper back plate I removed the timer without removing any of the wires from it. Then I installed the new timer and placed each wire from the old timer onto the new timer in the same terminal positions that they were on the old timer. After reassembling the dryer I plugged it in and tested it
... Read more and it worked correctly.
Read less
Daniel from Burlington, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer failed, needed replacement.
Unplugged the dryer from the electrical outlet. Simply removed the screws holding the long plate behind the dryer controls. Took two screws out that attached the failed timer to the dryer. Was careful to pull wiring out of the failed timer one wire at a time, replacing the wires into the new timer so as to be sure the wires were attached
... Read more to the new timer in the right sequence. Some of the wires were difficult to remove from the failed timer, needed to use a pliers or a screw driver to remove some of the wires. Attached the new timer to the dryer with two screws as the failed timer had been attached. Replaced the back panel to the dryer & plugged the dryer back in to the electrical outlet.
Read less
JAMES from TROY, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke the timer by moving it while dryer was still running
Moved dryer out into room so I could work on it. Unplugged from wall outlet and disconnected dryer vent.Removed screws from panel on the back side of the control panel.Compared timer on dryer to new one in box.Then I removed knob on front of timer.Removed screws holding timer to dryer.Installed new timer to dryer with same screws holding
... Read moreold timer to dryer.Placed knob on front of timer.Removed one wire connection at a time from old timer and installed to new timer.I did this until all the wire connections had been transfered.Re-installed panel on back of control panel.Connected new vent hose to dryer. ( Since dryer was away from wall I replaced my old vent hose with a new one.)Plugged dryer back into outlet and placed dryer back in place beside the washing machine.Wife then tried the dryer out and it's now working fine again.
Read less
Phillip from Pekin, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stop working after I moved the timer setting while dryer was running. So I replaced the thermal fuse while I had the dryer away from the wall, plus the lint filter was torn.
The repair was easy, what took the longest was cleaning the lint from the inside of the dryer and the housing that holds the lint filter. The inside of our dryer is now as free of lint as the day we bought it.To make the repairs I pulled the dryer away from the wall and removed the vent hose and unplugged the dryer from the outlet.I then
... Read moreremoved the screws from the back panel so I could replace the thermal fuse. I did this by removing one screw from the thermal fuse and pulled it free from the dryer.I then installed the new thermal fuse and screwed it to the dryer.Then I removed one wire at a time and installed them to the new thermal fuse.I then screwed the back panel to the dryer.Next I removed the screws and panel behind the control panel of the dryer so I could replace the timer.Once I could see the timer I compared my timer to the new one before doing anything else.Then I removed control knob from front of timer.Removed the screws holding old timer in place.Installed new timer to dryer with same screws and installed control knob to timer.Then I removed one wire at time from old timer and installed to new one, I did this until all wires had been connected.Then I installed the panel to the back of the control panel with the same screws.Installed new vent hose to back of dryer and plugged cord back into the outlet. Pushed dryer back into place.Remove old torn lint filter and replaced it with the new one.Wife then tried dryer out and it worked. Dryers been working just fine ever since.
The dryer wouldn't keep running after being started.
1. took off back panel 2. unswrewed old timer 3. removed wires from old timer one at a time while each time a wire was removed it was connected to the corresponding spot on the new timer. Doing this in sequence made sure the wires were connected correctly to the new timer. 4. re-attached the new timer to the dryer and replaced the back p
... Read morelate.
Read less
Jerry from Marquette, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
14 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer wouldn't advance.
Remove back cover plate to provide access to the timer. Remove the two screws which retain the component in place. Change wires one by one to the replacement part. Reinstall component and return screws in same order removed.
Robert from Coffee Springs, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
23 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't stay on
Determined that the knob/timer assembly wasn't working properly by testing the start button when holding the knob in different places. Disassembled the timer from the back of the dryer and used information on timer to order replacement part (partselect was used after a thorough search for both price and delivery time - both were superior
... Read more with partselect.com). Received the timer assembly overnight and placed in dryer with success. (Took a digital photo before disassembly to assist with reassembly).
Read less
Christina from Rock Hill, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
36 of 42 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
June 24, 2019
Can sometimes get dryer to start if we turn the timer slowly to find the sweet spot. Sometimes it starts and stops with the end of cycle buzzer going off. If i turn off the end of cycle buzzer it starts and stops the same way. I am thinking timer?
For model number LEN2000PW0
Hello Steve, Thank you for the question. Yes, this sounds like the timer switch, PartSelect Number PS11741713 is defective and will need to be replaced. Hope this helps!
2 people found this helpful.
Did this question help you?
Thank you for voting!
Russ
July 22, 2019
Cannot set the timer on normal cycle, I have to go to the bottom and it starts at 54 minutes and runs a while before I can turn it down. Can you help. If I leave it in that cycle it will run then if i leave it in that cycle it will run the full 54 minutes
For model number Duet 9250
Hello Russ, Thank you for the question. This normally indicates the timer is defective and will need to be replaced.Hope this helps!
2 people found this helpful.
Did this question help you?
Thank you for voting!
Michael
November 5, 2018
When i first set timer it will trip breaker. When i reset breaker and don't touch timer again, and just push the on button, everything works fine.
For model number LGQ8000JQS
Hello Michael, Thank you for the question. This sounds like a short in the switch causing it to trip the breaker. I would suggest replacing the switch.Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Melinda
February 6, 2019
Dryer switch has been slowly dying in the "timed dry" mode, sounds like a whine down and quit. However, i have found that the dryer turns on just fine in acuudry mode. Is the switch the problem? Please confirm part and is this just a screw off and screw back in dyi?
For model number GGQ9800PW1
Hello Melinda, Thank you for contacting us. I suggest checking the following parts: PS11741492 Push-to-Start Switch and PS11741713 Timer, 60 Hz.. These parts are connect with wire harnesses rather than screws. Good luck with your repair!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Kapri
January 16, 2020
My dryer runs fine on timed dry only. All other modes the timer does not move.
Hi Kapri,
Thank you for your question. If the timer is not advancing on anything except the timed dry cycle, you will need to check the timer and the cycling thermostat. To test the timer, disconnect your dryer from the power source and remove the control console. Locate the timer. In some models, you will be able to remove it for testing at this stage, in other models, you will also need to remove the rear panel behind the control console. Set your multi-meter to Rx1 and place the probes on the terminals. You are testing for continuity and should have a reading between 2000 and 3000 ohms. If your test returns a reading outside of this range, you need a replacement timer motor. To test the cycling thermostat, Unplug your dryer and open your dryer’s cabinet. Locate your cycling thermostat, it is often found on the blower housing or elsewhere in the airflow ducting. Test the thermostat for continuity by using a multi-meter on Rx1. To do this, touch the probes to the thermostat’s terminals.
If you receive a reading other than infinity or zero, you need a replacement cycling thermostat. We hope this helps. Thank you and have a great day.
Did this question help you?
Thank you for voting!
Laurel
February 28, 2023
My dryer turns on and runs on any setting but it wont shut off on its own.
Which patty do you think I need to replace? The timer?
For model number Leq8800jq1
Hi Laurel, thank you for the question. According to our research, the cause of the problem is either a defective door switch or a malfunctioning timer control. We recommend checking the door switch, part number PS11741701, with the switch button not depressed, touching one probe on the common terminal and the other between the normally open and normally closed terminals of a multimeter. If this is fine, we suggest checking the timer, part number PS11741713, and the thermal cut-off kit, part number PS334299. If the issue remains, you may need to replace the electronic control board, part number PS11755390. Thank you for your inquiry, good luck with this repair!
Dryer would not work at all on accu dry setting it only worked on timed dry. Then it wouldn’t dry but would tumble on all settings. I had a repairman install new heater parts but it still will not heat. What should we look at next.
For model number LEQ8000JQ4
Hi Sandra, thank you for reaching out. Based on the description, you may have this issue because of a faulty moisture control board, part number PS11755390. It monitors moisture level to adjust dry time in the automatic dry cycle. We would recommend replacing the moisture control board to fix the issue. We hope this solves your problem!
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Dryer-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"WP3406725","title":"WP3406725","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
