Pump-to-Siphon Break Drain Hose WP22001448 | Official Whirlpool Part | Fast Shipping | PartSelect
Pump-to-Siphon Break Drain Hose – Part Number: WP22001448
( Grid squares measure 1x1 inch )
Pump-to-Siphon Break Drain Hose – Part Number: WP22001448 Pump-to-Siphon Break Drain Hose – Part Number: WP22001448 https://partselectcom.azureedge.net/Schematics/Maytag/37313.gif

Pump-to-Siphon Break Drain Hose

PartSelect Number PS11739284

Manufacturer Part Number WP22001448

Manufactured by Whirlpool

Troubleshooting

This part fixes the following symptoms:

Leaking

This part works with the following products:

Washer, Washer Dryer Combo.

This part works with the following brands:

Maytag, International, Jenn-Air.

Part # WP22001448 replaces these:

214767, 215365, 22001448.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Part Videos

Replacing your Maytag Washer Pump-to-Siphon Break Drain Hose

Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Joseph from Plano, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10116738, WP22001448, WP213045, 206638, WP6-2022030
Leaking water
Well, I found the washer leaking water from the bottom a couple weeks ago. I finally got around to pulling off the front panel and ran a couple cycles to see where the water was coming from. Turns out the leak was at the plastic pump that does the draining after wash and rinse.

So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.

Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well.

Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.
191 of 217 people found this instruction helpful.
Was this instruction helpful to you?
Steven from Indianapolis, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP22001448, 206638
Leaking siphon break valve
1. Unplug power to the washer.
2. Remove 2 screws from bottom front panel on either side. Panel then rotates out and unhooks at the top. Remove front panel
3. Remove bolts from underneath the top front on both sides using a socket.
4. Rotate the top upward to provide space to see and work.
5. From the back of the washer, remove 4 bolts using a socket around the drain tube at the upper left.
6. From the front, the siphon valve can be removed from the inside upper right.
7. From the front, unscrew the clamp holding the drain hose on the water pump housing at the bottom right front and remove the hose. Be prepared for water to drain from the hose. Remove hose and siphon valve together and discard.
8. Install new hose on new siphon valve and screw new clamp tight. Make sure the rubber ring is inserted properly on the new valve (See old valve for reference)
9. Holding the siphon valve in place, use a socket and re-attach the 4 bolts around the drain tube at the back of the washer.
10. From the front, insert the opposite end of the new hose to the water pump at the lower right front and screw the circle clamp tight. Note: Re-use existing clamp.
11. Rotate the top back down into normal position.
12. Plug the power back in and run a short cycle and watch for leaks.
13. If no leaks, re-attach bolts for the top with a socket.
14. Re-attach front panel with 2 screws. Done.
24 of 29 people found this instruction helpful.
Was this instruction helpful to you?
john from COTTAGE GROVE, MN
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
WP22001448, WP213045, 206638, 205000
leaking hoses and low tension on belts
opened front of washer, removed motor, replaced glides and springs, installed motor and replaced belts. Installed new hoses and vacuum breaker. Its been a week now and no leaks or other problems.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11739284
Manufacturer Part Number: WP22001448
Brand
Model Number
Description
Maytag
6329
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6349
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6359
Washer - MAYTAG AUTOMATIC WASHER
Maytag
A104
Washer - Top Loading
Maytag
A105
Washer - Top Loading
Maytag
A110
Washer - Top Loading
Maytag
A112
Washer - Top Loading
Maytag
A180
Washer - Top Loading
Maytag
A181
Washer - Top Loading
Maytag
A182
Washer - Top Loading
Maytag
A183
Washer - Top Loading
Maytag
A190
Washer - Top Loading
Maytag
A1910
Washer - Top Loading
Maytag
A209
Washer - Top Loading
Maytag
A209S
Washer - Top Loading
Maytag
A210
Washer - Top Loading
Maytag
A210S
Washer - Residential
Maytag
A211
Washer - Top Loading
Maytag
A211S
Washer - Top Loading
Maytag
A212
Washer - Top Loading
Maytag
A212S
Washer - Residential
Maytag
A282
Washer - Top Loading
Maytag
A283
Washer - Top Loading
Maytag
A284
Washer - Top Loading
Maytag
A305
Washer - Top Loading
Maytag
A310
Washer - Top Loading
Maytag
A310S
Washer - Residential
Maytag
A312
Washer - Top Loading
Maytag
A312S
Washer - Residential
Maytag
A382
Washer - Top Loading