Maytag/Maytag_Thumb/37313.gif
See part 16 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Pump-to-Siphon Break Drain Hose

$ 33.40   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11739284
Manufacturer Part Number WP22001448
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, International, Jenn-Air.
Part# WP22001448 replaces these:
214767, 215365, 22001448
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Part Videos

Replacing your Maytag Washer Pump-to-Siphon Break Drain Hose

Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 3 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Leaking water
    Well, I found the washer leaking water from the bottom a couple weeks ago. I finally got around to pulling off the front panel and ran a couple cycles to see where the water was coming from. Turns out the leak was at the plastic pump that does the draining after wash and rinse.

    So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.

    Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well.

    Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.
    191 of 217 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Leaking siphon break valve
    1. Unplug power to the washer.
    2. Remove 2 screws from bottom front panel on either side. Panel then rotates out and unhooks at the top. Remove front panel
    3. Remove bolts from underneath the top front on both sides using a socket.
    4. Rotate the top upward to provide space to see and work.
    5. From the back of the washer, remove 4 bolts using a socket around the drain tube at the upper left.
    6. From the front, the siphon valve can be removed from the inside upper right.
    7. From the front, unscrew the clamp holding the drain hose on the water pump housing at the bottom right front and remove the hose. Be prepared for water to drain from the hose. Remove hose and siphon valve together and discard.
    8. Install new hose on new siphon valve and screw new clamp tight. Make sure the rubber ring is inserted properly on the new valve (See old valve for reference)
    9. Holding the siphon valve in place, use a socket and re-attach the 4 bolts around the drain tube at the back of the washer.
    10. From the front, insert the opposite end of the new hose to the water pump at the lower right front and screw the circle clamp tight. Note: Re-use existing clamp.
    11. Rotate the top back down into normal position.
    12. Plug the power back in and run a short cycle and watch for leaks.
    13. If no leaks, re-attach bolts for the top with a socket.
    14. Re-attach front panel with 2 screws. Done.
    • Steven from Indianapolis, IN
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Socket set
    • Parts Used:
      WP22001448, 206638
    24 of 29 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    leaking hoses and low tension on belts
    opened front of washer, removed motor, replaced glides and springs, installed motor and replaced belts. Installed new hoses and vacuum breaker. Its been a week now and no leaks or other problems.
    • john from COTTAGE GROVE, MN
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Pliers, Socket set
    • Parts Used:
      WP22001448, WP213045, 206638, 205000
    4 of 6 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11739284
      Manufacturer Part Number: WP22001448
      Brand
      Model Number
      Description
      Maytag
      6329
      Washer - MAYTAG AUTOMATIC WASHER
      Maytag
      6349
      Washer - MAYTAG AUTOMATIC WASHER
      Maytag
      6359
      Washer - MAYTAG AUTOMATIC WASHER
      Maytag
      A104
      Washer - Top Loading
      Maytag
      A105
      Washer - Top Loading
      Maytag
      A110
      Washer - Top Loading
      Maytag
      A112
      Washer - Top Loading
      Maytag
      A180
      Washer - Top Loading
      Maytag
      A181
      Washer - Top Loading
      Maytag
      A182
      Washer - Top Loading
      Maytag
      A183
      Washer - Top Loading
      Maytag
      A190
      Washer - Top Loading
      Maytag
      A1910
      Washer - Top Loading
      Maytag
      A209
      Washer - Top Loading
      Maytag
      A209S
      Washer - Top Loading
      Maytag
      A210
      Washer - Top Loading
      Maytag
      A210S
      Washer - Residential
      Maytag
      A211
      Washer - Top Loading
      Maytag
      A211S
      Washer - Top Loading
      Maytag
      A212
      Washer - Top Loading
      Maytag
      A212S
      Washer - Residential
      Maytag
      A282
      Washer - Top Loading
      Maytag
      A283
      Washer - Top Loading
      Maytag
      A284
      Washer - Top Loading
      Maytag
      A305
      Washer - Top Loading
      Maytag
      A310
      Washer - Top Loading
      Maytag
      A310S
      Washer - Residential
      Maytag
      A312
      Washer - Top Loading
      Maytag
      A312S
      Washer - Residential
      Maytag
      A382
      Washer - Top Loading

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service