Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This dryer door seal is designed to create a secure, insulated barrier around the door opening, preventing heat from escaping and external air from entering during operation. Made from high-temperature-resistant, durable material, it enhances energy efficiency by maintaining consistent internal temperatures, resulting in faster drying cycles and reduced energy consumption. A properly functioning seal also helps prevent safety hazards associated with air leaks and ensures optimal performance. Replacing a worn or damaged gasket restores the dryer’s ability to retain heat and operate effectively.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
DUSTIN W - February 21, 2019
Verified Purchase
very simple repair
The part was exactly like the original in quality, it fit perfectly and was so simple to install that I let my nine year old do most of it. It was like crafting
★★★★★
★★★★★
Kenneth P - May 28, 2019
Verified Purchase
Easy Repair
Part came as described.
★★★★★
★★★★★
Deb G - March 15, 2023
Verified Purchase
,Perfect fit
Fast delivery and exact part we needed
★★★★★
★★★★★
Michael H - January 13, 2023
Verified Purchase
Easy repair
Part was great fit well
★★★★★
★★★★★
Shayna N - April 15, 2021
Verified Purchase
Good Product
Very fast shipping and part has worked so far!
★★★★★
★★★★★
James B - July 16, 2020
Verified Purchase
Great part
Came fast worked well
★★★★★
★★★★★
Dawn M - April 27, 2020
Verified Purchase
Easy repair.
Part came quickly with informative video??
★★★★★
★★★★★
Ronnie B - July 18, 2019
Verified Purchase
EASY Repair. My wife did all the work. I helped just a little putting door back on.
Part was identical to old one. NO problems.
★★★★★
★★★★★
Haubrich, M - September 7, 2025
Verified Purchase
OEM is the way to go.
Perfect fit. I tried a cheaper one of Amazon and it was too thick and the door wouldn’t stay closed. I had no issue with this OEM product. Should have just went this route to begin. You live and learn I guess.
★★★★★
★★★★★
Vickie B - June 4, 2021
Verified Purchase
Easy Repair
Identical to the part I needed to replace. Easy to glue in place, fit perfect.
< Prev
1
2
Next >
Installation Instructions
Average Repair Rating: 4.4 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replacing gasket on dryer door
Ripped out the rest of the old gasket, applied glue, applied gasket, let dry.
I would point out that the adhesive says not to use around heat-producing products. And this was on a dryer. The instructional video never mentioned how long it took the glue to dry so that it could be restored. Just said, "until it dries.'
Simply remove the door, clean out any remaining gasket and loose glue. Apply a layer of high temp adhesive and quickly stretch the gasket and stick it in the glue. Let it dry overnight, remount the door and you are done.
Very simple remove door pull off old seal, apply small amount of adhesive around seal seat. Install seal to door let cure for several hours over night is best
Vincent from RAYMOND, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad door gasket
Removed old seal and replaced with new one. Save yourself time and get some acetone to remove old glue works great!
Joseph from NEOSHO, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seal busted
I took dryer door off, put on a flat surface, used pliers to pull old seal off, use a brush to clean any remaining fibers, applied adhesive & let it dry for minute or two til tacky then install seal, let dry for 24hrs, put dryer door back on & done.
Take the door off of the dryer. Lay it on a towel. Remove old gasket. Clean the channel the door gasket fits into with glue remover. Squeeze high temperature glue into the channel, let the glue set up. Put the new gasket into the channel, tape it down in a few places. Let it sit 24 hours for the glue to set up. Put the door back on. You c
... Read morean put the door on immediately as long as you don't use the dryer for 24 hours. Easy.
Read less
Kenneth from N RIDGEVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wore out gasket
removed old gasket took door off 4 screws. cleaned seal area applied glue put on gasket easy
diora from ROCKFORD, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Gasket tore out
Put high temperature glue on first, then put door gasket over the high temperature glue and then let it set for 24 hours. It worked fine....
Manolak from MURFREESBORO, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
16 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerald
August 11, 2017
Received my door seal.I did not receive either the instructions or the adhesive to mount the seal what do I use to bond the seal to the door. Where can I get it .
For model number MGDx655DW0
Hi Gerald,
Thank you for the questions. We recommenced the High Temperature Adhesive. Once you remove the old seal and clean any old glue from the channel the seal will fit into, you can squeeze the glue around the door into the channel and wait a min then line the seal with the glue and neatly press the seal down working around the door.
Hope this helps!
I purchased a door seal - part w10861521-- what adhesive does this require... please provide me a part number
For model number MEDC215EW0
Hello Wayne, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757492. Thank you for your inquiry, good luck with this repair!
It takes 4 or 5 times to dry a regular load of clothes? Dryer heats but not enough to dry on 1st cycle
For model number MEDC200XW3
Hello Shawn, Thank you for the question. I suggest testing the Internal Bias Thermostat PartSelect Number PS11741405 and the thermostat and fuse in the Thermal Cut Off Kit PartSelect Number PS334299 with a multi meter to check the continuity. Hope this helps!
Does this door gasket fit my model? Medc215ew1
Thanks
For model number MEDC215EW1
Hello and thank you for writing.
No, but seal # PS11773177 is in the list of compatible parts for your model number. This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit. We hope this helps. Please contact us anytime if you require further assistance.
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dryer-Seals-and-Gaskets.htm"},{"position":3,"name":"W10861521","title":"W10861521","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
