IGNITER GLOWBAR

Do you know what the ignition plate ohm reading be for the three different oven igniters should be. Upper upper broiler and lower oven. I think it as follows broiler 109 ohms, upper oven 75 ohms and the bottom 246 ohms. The bottom oven will not ignite. However, I have a feeling somebody has changed all three ignition plates. I want to verify the ohm readings so I know which plates need to be changed. The lower oven doesn't try to light up the plate thus no attempt to ignite the burner. I have checked the control circuit for the lower oven and it appears to be okay. The upper works fine. I just want to verify it has the correct parts. Your prompt attention concerning this matter is very important. My customer is being patient, for now. Thanks Frank

My burner igniter won't stop sparking

Looking for the broiler igniter glow bar

After setting the oven to bake at 350, it will not pass 100 and the igniter glows. Does the igniter need to be replaced?

I have a GE range/oven. The stove top and broil features work great, but whenever I would use the oven feature, regardless of temp, the breaker would trip. I replaced the control board and for the most part it will work but it will still trip the breaker sometimes while using bake. If the microwave is used while the oven is on it will surely trip. Could this be the lower glow plug or maybe just a weak breaker? Both are only 5 years old as the house and appliances are new.