Part Location Diagram of W10822259 Whirlpool Condenser Fan Motor
See part 24 in the diagram
Replacing your Whirlpool Refrigerator Condenser Fan Motor
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Condenser Fan Motor W10822259

★★★★★
★★★★★
7 Reviews

Rated by 7 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 211.65
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11723170
Manufacturer Part Number W10822259
Manufactured by Whirlpool for Whirlpool, KitchenAid, Kenmore, Roper
Product Description

Condenser Fan Motor Specifications

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Refrigerator Condenser Fan Motor

Replacing your Whirlpool Refrigerator Condenser Fan Motor
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm | Freezer section too warm | Fridge and Freezer are too warm
This part works with the following products:
Refrigerator, Ice Maker.
Part# W10822259 replaces these:
2166191, 2176336, 2183437, 2188534, 2188537, 4387244
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Motor Bearings Locking Up
Removed the back panel on the refrigerator--unplugged the condenser fan motor--removed the motor--placed a small fan to cool the condenser--called parts select--ordered the motor--the motor arrived less than 24 hours after I ordered it--replaced the motor and rear panel on the refrigerator--probably saved more than $200. 00--Very happy with parts select service--plus I had a misunderstanding with my credit card and john at parts select was very helpful --not their fault--excellent company
  • Joseph from North Palm Beach, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fan wouldn't run as needed. The top of the refrigerator was really hot.
My husband took the old motor out by taking the screws out. Then, he unplugged the fan. We searched your site for the part. With the pictures on the site, we were able to match the motor exactly. The delivery was really fast. When we received the part, he installed the fan and plugged in the power connector. We have replaced refrigerator fans before but anyone can do this with no experience. Just follow the instructions and you're all set.
  • Teresa from Moneta, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The after market 4 yr old motor was making a wierd noise.
Removed back panel and removed the motor put new quick disconnect on and tapped the mounting holes. Removed and cleaned fan blade from old motor and put on the new motor. Mounted motor plugged it in and replaced panel.
  • Marcus from St Petersburg, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Suspected fan failure
I pulled the refer from the wall, disconnected the power and removed the cardboard cover at the base. Using a vacuum and compressed air, I cleaned it thoroughly.
I used a screwdriver to lift the locking tab on the 3-wire connector and removed it. The best way to get the three bolts off was with a 1/4" drive ratchet and go to the std nutdriver handle when they were loose. The fan came out carefully with the blade. I removed the blade nut with flat nosed pliers, cleaned it and placed it on the new motor. I replaced the motor and installed the screws. On a do-over I would install onew screw in each hole at least halfway to get the threads started/ threaded. After that the connector slipped in and I spun the blade to check for interference. The blades can be slightly bent, but use of nut tension can also slightly adjust fan alignment as it's tight to the housing.
That's it
  • Don from Oregon City, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy and the Fan wasn't blowing like it should
I saved my Whirlpool Refrigerator (Model ET21GKXHN00) and learned a lesson. Don’t put off cleaning the refrigerant coils underneath the refrigerator. I replaced the refrigerator about 10 years ago and began to notice that the sound of this one running had changed slightly. I remembered that’s what happened to the first one just before it died. I removed the panel on the bottom front and saw that the refrigerant coils were covered with dust. It was really bad. I vacuumed them with the “radiator attachment” on the vacuum cleaner and plugged the refrigerator back in. It still didn’t sound right and I couldn’t feel the air blowing out like it should. So I rolled the refrigerator out and removed the back lower cover to see the compressor and the cooling fan. The fan was clogged with dust so I vacuumed that as well. But the fan wouldn’t spin freely by hand. The fan motor only had 3 screws holding it onto the plastic fan bezel and was easily removed by unsnapping the electrical connector on the motor. I removed the fan motor and tried to clean it with a few drops of WD40 on the shaft. But when I put it all back and plugged it in the fan just barely started turning. I unplugged the refrigerator and ordered the fan motor from PartSelect.Com (Item Number PS371043). The picture looked exactly like the motor that was in my refrigerator. I threw everything away in the refrigerator, cleaned it out and left it unplugged until the motor came. The motor arrived in a few days and it looked exactly like the one I had removed. It had the same electrical specifications stamped on the back and the electrical connector was the same and in the same location on the motor. I put the fan blade on the new motor and installed it exactly like the old one was. It only took 15 minutes or so and was very easy to install. When I plugged the refrigerator in the compressor started right away and so did the fan. It ran like a champ. In a few hours the refrigerator got cold and began to cycle on and off like normal and the fan blows like new. The sound is normal and the total running sound is quiet again like a new refrigerator. So for $84.67 I saved my $1300 refrigerator and learned not to neglect checking the build up of dust in the compressor fan section. I’m sure that’s what happens to most of the refrigerators people put out for trash pickup in front of their houses. The cause of the problem is when air flow is restricted across the refrigerant coils too much heat returns to the compressor and eventually causes the compressor to fail. I appreciate that we live in a time when you can order exactly what you need on the internet and make home repairs when you need to. Thanks Part Select for sending me the correct part. It’s nice to have milk and cold drinks again.
  • William from Centreville, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
35 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noticed fridge not cooling as it should
Removed the lower back panel (10 small screws)Found the condenser motor froze up and not moving air across the cooling coils.So I got a small table fan and set it behind the fridge and it kept the fridge cooling for 3 days till the new fan motor arrived. Removed 3 small screws holding the fan motor in the bracket and unpluged the wiring harness.Removed the fan from old motor and used it on the new motor.Replaced the fan in the bracket and plugged the wiring harness back in. Worked great. Very easy.Did not have to empty fridge because table fan kept coils cool. Ordering part was easy and shipping fast.Great job guys!!
  • Robert from Franklin, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
21 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Believed the condensor motor was defective and causing strange odor
First disconnected the quick release electrical connection. Then loosened the three screws that were holding the motor in the bracket. However, space is limited and even with small hands it was rather difficult as the screws were in there very tight. There are a few sharp edges on the bracket and in the surrounding area of the motor area, and nicked myself a couple of times. Removed the fan blade from the old motor and attached it the new motor with the old flat washer/screw. Reconnected the electrical connection and that was that. All-in-all an easy repair.
  • Nicholas from Frankfort, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set
45 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cassandra
July 19, 2019
The instructional video and the customers who installed this condenser fan motor do not say anything about using a self tapping screw to make new threads on the motor. But on the order page it mentions needing one. Do i need one or not?
For model number ED20TQXFW01
PartSelect logo
Hello Cassandra, thank you for your question. This replacement Condenser Fan Motor for your model does require self tapping screws. Screws are included. Good luck with your repair!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Douglas
June 29, 2021
I have a Kenmore 10677297790. The motor looks right but the wiring harness on the refrigerator has 2 green wires, 2 red wires and 2 white wires whereas the replacement harness has 1 of each. Do I cut off the fan motor connector and attach the single red, green white wires to the combined 2 into one red, green and white and use the old connector?
For model number 10677297790
PartSelect logo
Hello Douglas, Thank you for the question. The part has been updated by the manufacture. The 2 pin would connect to the red wire on the condenser fan motor and the 2 white will go to the white wire on the condenser motor. The green wire will go to ground. We hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Chris
March 9, 2023
The fan I need to replace is in freezer, behind a panel. Works but noisy. Your video shows the man replacing a fan in back near comp. Is this the fan I need? Thank you
For model number 1069750383
PartSelect logo
Hi Chris, thank you for reaching out. According to our research, the part you may need to replace to fix the issue is the evaporator fan blade, part number PS11738954. We hope this helps, good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
Dean
September 30, 2023
Hello I have replaced the condenser fan before. The doors were very hot, fixed the issue 6years ago. Now the problem I'm having is that the fan doesn't even start when plugged in should I replace the motor again or should I start shopping for a new spare fridge. Thanks
For model number Rt18dkxhw00
PartSelect logo
Hi Dean, thank you for the question. Based on our research, if the condenser fan motor, part number PS11723170, does not start, then it is most likely faulty and may need to be replaced. We hope this solves your problem!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11723170
Manufacturer Part Number: W10822259
Brand
Model Number
Description
Kenmore
10641012100
Refrigerator
Kenmore
10641012101
Refrigerator
Kenmore
10641012104
Refrigerator
Kenmore
10641014100
Refrigerator
Kenmore
10641014101
Refrigerator
Kenmore
10641014104
Refrigerator
Kenmore
10641212100
Refrigerator
Kenmore
10641212101
Refrigerator
Kenmore
10641214100
Refrigerator
Kenmore
10641214101
Refrigerator
Kenmore
10641512100
Refrigerator
Kenmore
10641512101
Refrigerator
Kenmore
10641514100
Refrigerator
Kenmore
10641514101
Refrigerator
Kenmore
10641519100
Refrigerator
Kenmore
10641519101
Refrigerator
Kenmore
1064689482991
Ice Maker
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
10648062890
Refrigerator
Kenmore
10648062891
Refrigerator
Kenmore
10648062892
Refrigerator
Kenmore
10648062893
Refrigerator
Kenmore
10648062894
Refrigerator
Kenmore
10648062895
Refrigerator
Kenmore
10648064894
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service