Quick Question!

Have you ever purchased from PartSelect.com before?

1152574-1-S-Frigidaire-134418700         -Agitator Drive Block
1152574-1-S-Frigidaire-134418700         -Agitator Drive Block 1152574-2-S-Frigidaire-134418700         -Agitator Drive Block 1152574-3-S-Frigidaire-134418700         -Agitator Drive Block https://www.partselect.com/Schematics/Frigidaire/G0LGVKO9.gif

Agitator Drive Block

Your Price

$31.33
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1152574
Manufacturer Part Number 134418700
Manufactured by Frigidaire

The agitator drive block rotates the agitator assembly in your washer. If the drive block breaks down due to wear and tear the agitator will stop working. If you notice that your washer is making loud noises while washing, this may indicate an issue with the agitator block. You will find this part underneath the dispenser cover and cup. You will need a 1/2-inch socket to remove the agitator bolt and then simply lift off the agitator (this may require some effort to lift off). Use a flat-head screwdriver to remove the old drive block, push the new one into place with firmness. This part is made of metal and measures about 2 inches long and 1 inch wide.

This part works with the following brands: Frigidaire, Kenmore, Gibson, Westinghouse, Kelvinator, Tappan, Crosley, Uni, Electrolux.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Will not agitate.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

66 of 111 people found this instruction helpful

Parts Used:
  • Agitator Drive Block
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: James from Somerville, MA

Agitator drive block wore out

Removed fastening screw and Agitator. Removed and replaced Agitator Drive Block. Replaced and fastened Agitator. Done in 5 min.

Ordered part around noon. Shipping was 3-5 days. Part arrived in LESS than 24 hours.

Very happy camper here!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

52 of 79 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Socket set
Customer: dave from port sanilac, MI

Bearing and seal at top of transmission went bad causing oil from transmission to stain clothes

I removed front and top of washer to get acess to the tub. removed cap to tub along with inner tub and agitator. the hardest part is removing the springs on the bottom and tilt it forward to get tub out. removed belt, pulley and bolts holding transmission in place. reassemble using silicone grease on seals and washers. works great now

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Agitator Drive Block
Level of Difficulty: Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: Tim from Flemington, WV

Transmission wore out

After struggeling the most with lifting out the inner drum and then the wash drum. I realized when the job was complete a better way. 1. Take the top off the washer. 2. take the front off the washer. Then disconnect all wires and hoses from assembly One small hose on the tub and the pump hose at the bottom. 3. at the bottom of the overall assembly there are 3 braces holding the tub assembly with 2 springs on each brace. Go under and remove the springs and then lift the whole assembly out into the middle of the floor. 4. remove the top cap off of the agitator. 5. remove the agitator. 6. if you are lucky and the bolts are not seized in the block that holds the shaft remove the small steel block from the bell and remove the bell. 6. Slide the inner tub up and off the shaft and again if all goes well the outer wash tub should slip up off the shaft as well. 7. remove the drive belt from the motor and transmission.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1152574
Manufacturer Part Number: 134418700
Brand Model Number Description
Kenmore41789980100Washer Dryer Combo
Kenmore41789980800Washer Dryer Combo
Kenmore41790802990Washer Dryer Combo
Kenmore41790802991Washer Dryer Combo
Kenmore41790802992Washer Dryer Combo
Kenmore41790807990Washer Dryer Combo
Kenmore41790812990Washer Dryer Combo
Kenmore41790812991Washer Dryer Combo
Kenmore41790812992Washer Dryer Combo
Kenmore41790814000Washer Dryer Combo
Kenmore41790814001Washer Dryer Combo
Kenmore41790814002Washer Dryer Combo
Kenmore41790817990Washer Dryer Combo
Kenmore41790862990Washer Dryer Combo
Kenmore41790862991Washer Dryer Combo
Kenmore41790862992Washer Dryer Combo
Kenmore41790872990Washer Dryer Combo
Kenmore41790872991Washer Dryer Combo
Kenmore41790872992Washer Dryer Combo
Kenmore41791702000Washer Dryer Combo
Kenmore41791702001Washer Dryer Combo
Kenmore41792702200Washer Dryer Combo
Kenmore41793702200Washer Dryer Combo
Kenmore41793702201Washer Dryer Combo
Kenmore41793802200Washer Dryer Combo
Kenmore41793802201Washer Dryer Combo
Kenmore41793812200Washer Dryer Combo
Kenmore41793812201Washer Dryer Combo
Kenmore41793814200Washer Dryer Combo
Kenmore41793814201Washer Dryer Combo