We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
February 4, 2019
My dishwasher is not that old. In fact it has not been hooked for about a year. Today i hooked it up.It turns on but does not allow any water in the washer.There is a little clear plastic water reservoir does not have any water in it.When washer is on the timer is set it sets there like it is waiting for a command. Yes water is turned on. So what do you think is the wrong with it?Is it worth fixing?Thanks mike
For model number dw80h9970us
Hello Mike, Thank you for contacting us! I suggest checking the following part: PS10061335 VALVE WATER;AC110-127V,A-1,11#250,4.7L. You can test this part with a multimeter. If you are unsure of the function of the multimeter, we do offer assistance on our website. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Oscar
February 26, 2019
I have a Samsung dishwasher dw80h9930us
Having an erro code 5e, turned it in and it sounds like is working but water is not coming in. Do you think is the water inlet valve?I checked the filter the drain hose and the water intake
Hi Oscar,
Thank you for your question. The 5E error code that is displayed on your dishwasher is a water drain error. Either the drain pump or the drain hose is clogged with debris and you will need to inspect them and clean them if there is debris in them. If you have an air gap installed on the top of the sink, check the clean out trap in the air gap first. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Joseph
January 28, 2020
I am getting a 4e code and i am still getting water supply to the inlet valve. Could the sensor be bad or clogged? Or am i dealing with another part?
For model number DW80H9930US
Hi Joseph, thank you for your question. The 4e error code indicates that not enough water is getting inside of your appliance. The parts that cause this issue are the water inlet valve, a kinked/clogged inlet hose, or your flow meter. This problem can also be caused if the supply of water from your home is not enough. Good luck with your repair.
Was this helpful?
Thank you for voting!
Rich
December 17, 2024
My dishwasher is over filling and pouring out of the front. Even if unplugged water continues to enter the washer. Would this be the control valve sticking open?
For model number DW80J7550US
Hi Rich, thank you for getting in touch. Yes, if your dishwasher is overfilling and water continues to enter even when it's unplugged, it is likely that the water inlet valve, part number PS10061335, is stuck open. A malfunctioning water inlet valve can cause the machine to continuously fill with water and overflow. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10061335
Manufacturer Part Number: DD33-01001A
