Official Murray Leaf Blower / Vacuum Parts

Carburetor O-ring – Part Number: 753-06185

Your Price

$6.40

Murray Leaf Blower / Vacuum Carburetor O-ring

PartSelect Number PS9118815

Manufacturer Part Number 753-06185

This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.

Installation Instructions

Ricardo from FORT WORTH, TX

Trimmer Would Not Start

The replacement of the carburetor, O-ring, and gasket was simple. I removed 2 screws that held the air cleaner and carburetor in place, swapped them out, and replaced the screws. What took longest was finding a piece of fuel line after breaking one of them. It was brittle after hanging in my garage for several years. I found some in my garage and replaced it. It took a few pulls to get it started, but ran very smooth.

Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues. Read more...

Your Price

$11.39

Murray Leaf Blower / Vacuum Spark Plug

PartSelect Number PS10009739

Manufacturer Part Number 753-06847

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.

Carburetor Gasket – Part Number: 753-06253

Your Price

$6.40

Murray Leaf Blower / Vacuum Carburetor Gasket

PartSelect Number PS9119051

Manufacturer Part Number 753-06253

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

Installation Instructions

john from SHARPSVILLE, PA

string trimmer would not start

emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines onto the new carburetor.put some fuel in the tank. started the trimmer. runs great. Read more...

Your Price

$12.28

Murray Leaf Blower / Vacuum Impeller Asm

PartSelect Number PS16429077

Manufacturer Part Number 753-08491

This is an impeller assembly kit designed for use with various models of leaf blower and comes with all the hardware necessary to replace it, including the impeller, the securing nut and 1 washer for each side of the impeller. If you notice the blowing power of the leaf blower is reduced or that there is any physical damage to the impeller like bent or cracked blades, the impeller needs to be replaced immediately. When replacing the impeller, you will need a screwdriver or wrench to remove the impeller cover, and you should ensure you use proper safety equipment like gloves.

Trimmer Switch – Part Number: 791-182405

Your Price

$15.68

Murray Leaf Blower / Vacuum Trimmer Switch

PartSelect Number PS10014381

Manufacturer Part Number 791-182405

This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your make, model, and diagrams to ensure this switch is correct for you.

Aircleaner Filter – Part Number: 791-181757

Your Price

$6.40

Murray Leaf Blower / Vacuum Aircleaner Filter

PartSelect Number PS9139498

Manufacturer Part Number 791-181757

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

Trimmer Insulator O-Ring – Part Number: 753-06184

Your Price

$6.40

Murray Leaf Blower / Vacuum Trimmer Insulator O-ring

PartSelect Number PS9120832

Manufacturer Part Number 753-06184

This is a genuine replacement part manufactured for use with gas-powered lawn and garden equipment. The insulator o-ring is used to form a seal between the insulator assembly and the cylinder. This o-ring is available as an individual replacement part and is included with the insulator assembly part number 753-06189.