Models > ZBD1870N02SS

ZBD1870N02SS General Electric Dishwasher - Overview

Sections of the ZBD1870N02SS

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Lower Rack Wheel and Stud – Part Number: WD12X10231
Lower Rack Wheel and Stud
★★★★★
★★★★★
(14)
PartSelect #: PS1481883
Manufacturer #: WD12X10231
This is a replacement wheel and stud for your lower dish rack. This part is sold individually. The wheels are easy to replace, you just need to snap them in place after removing the old one.
$13.21
  In Stock
Upper Rack Wheel – Part Number: WD12X10230
Upper Rack Wheel
★★★★★
★★★★★
(2)
PartSelect #: PS1481882
Manufacturer #: WD12X10230
Sold individually.
  No Longer Available
Rinse Aid Cap – Part Number: WD12X10122
Rinse Aid Cap
★★★★★
★★★★★
(21)
PartSelect #: PS958932
Manufacturer #: WD12X10122
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
$16.44
  In Stock
Guide Rail Bracket Assembly – Part Number: WD12X10221
Guide Rail Bracket Assembly
★★★★★
★★★★★
(5)
PartSelect #: PS1481873
Manufacturer #: WD12X10221
This guide rail bracket assembly, also known as the dishrack support roller, is made for your dishwasher. It connects to the tub, and allows the dishrack guide rail to move in and out. If the wheels o...
  No Longer Available
Basket Assembly Silverware – Part Number: WD28X10215
Basket Assembly Silverware
★★★★★
★★★★★
(20)
PartSelect #: PS2355926
Manufacturer #: WD28X10215
This is a 2-part basket with the handle being on one side.
$23.29
  In Stock
Guide Rail Cap – Part Number: WD12X10222
Guide Rail Cap
PartSelect #: PS1481874
Manufacturer #: WD12X10222
$8.02
  In Stock
O RING – Part Number: WD08X23648
O RING
PartSelect #: PS12726384
Manufacturer #: WD08X23648
$8.78
  In Stock
RING NUT W/GASKET – Part Number: WD02X23651
RING NUT W/GASKET
PartSelect #: PS12342730
Manufacturer #: WD02X23651
$8.06
  On Order
Door Hinge Spring – Part Number: WD03X10030
Door Hinge Spring
★★★★★
★★★★★
(2)
PartSelect #: PS1481850
Manufacturer #: WD03X10030
Sold individually.
$12.00
  In Stock
Main Conduit – Part Number: WD12X10164
Main Conduit
PartSelect #: PS958967
Manufacturer #: WD12X10164
This is a water feed system that receives pressurized water and sends it to the spray arms.
$23.70
  Special Order
LATCH Assembly – Part Number: WD13X23417
LATCH Assembly
PartSelect #: PS12068850
Manufacturer #: WD13X23417
$77.15
  In Stock
DOOR GASKET Assembly – Part Number: WD08X10050
DOOR GASKET Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS958901
Manufacturer #: WD08X10050
  No Longer Available

Questions And Answers for ZBD1870N02SS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the ZBD1870N02SS

[Viewing 4 of 4]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheels had come off and were broken
We ordered a whole new set for the lower rack and even though they were smaller than the original ones, we replaced them all and now the rack slides in and out of the dishwasher with ease!
Parts Used:
Lower Rack Wheel and Stud
  • Christina from Canton, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
23 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cap was melted
replaced it
Parts Used:
Rinse Aid Cap
  • Greg from Doon, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
teenagers abusing the dishwasher
the repair was simple the wheels snapped on and the rails screwed right off if your shopping around look no further this site is great
Parts Used:
Lower Rack Wheel and Stud Upper Rack Wheel Guide Rail Bracket Assembly
  • matt from fresno, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
13 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!