Models > Z42

Z42 - Overview

Models starting with Z42

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
  In Stock
Blade Mower Hi Lift – Part Number: 532405380
Blade Mower Hi Lift
★★★★★
★★★★★
(1)
PartSelect #: PS9017804
Manufacturer #: 532405380
$23.87
  In Stock
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
$8.71
  On Order
Blade Mower – Part Number: 532138971
Blade Mower
★★★★★
★★★★★
(2)
PartSelect #: PS9286056
Manufacturer #: 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
$16.18
  In Stock
Idler Pulley, Flat – Part Number: 539110311
Idler Pulley, Flat
★★★★★
★★★★★
(1)
PartSelect #: PS9031679
Manufacturer #: 539110311
This is an OEM replacement part for various models of lawn mowers. The Idler Pulley is used to apply tension to the blade belt, allowing the belt to turn. It has an O.D. of approx. 2.75 inches, is ma...
$13.69
  On Order
Blade High Lift – Part Number: 532180054
Blade High Lift
PartSelect #: PS9015048
Manufacturer #: 532180054
This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging t...
$17.43
  In Stock
Bearing – Part Number: 931-0374
Bearing
PartSelect #: PS9164778
Manufacturer #: 931-0374
The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their pos...
$7.88
  In Stock
Pulley Idler – Part Number: 532196106
Pulley Idler
★★★★★
★★★★★
(2)
PartSelect #: PS9287043
Manufacturer #: 532196106
This blade idler pulley (part number 196106) is for lawn tractors. Blade idler pulley 196106 applies tension to the blade belt, allowing the belt to turn.
$26.14
  In Stock
Lawn Tractor Ground Drive Belt – Part Number: 539110411
Lawn Tractor Ground Drive Belt
PartSelect #: PS9288485
Manufacturer #: 539110411
(1/2 x 56-5/16-inch) This ground drive belt is for lawn tractors. Ground drive belt turns the transmission pulley to move the tractor. Wear work gloves to protect your hands when installing this part.
$33.15
  On Order
Washer-Spacer – Part Number: 532187690
Washer-Spacer
PartSelect #: PS9286886
Manufacturer #: 532187690
$3.99
  In Stock
Front Baffle – Part Number: 531170601
Front Baffle
★★★★★
★★★★★
(1)
PartSelect #: PS17016483
Manufacturer #: 531170601
Front Baffle
$11.20
  In Stock
Screw – Part Number: 532137729
Screw
PartSelect #: PS9009676
Manufacturer #: 532137729
$4.99
  In Stock
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.
Read less
Parts Used:
Blade Mower
  • Trace from LISLE, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Deflector shield cracked. Need to replace.
Mark the location of the spring so you know how it goes on. Snip off the push nut holding the deflector shield pin. Hammer the pin out. Insert the pin with the spring holding the new deflector shield. Use a socket to steady the push nut and hammer the pin into the push net until secure.
Parts Used:
Nut-Push Deflector Shield
  • Travis from PLATTE CITY, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top