YWEE730H0DS1 Whirlpool Range - Overview

Hello Todd, Thank you for the question. If the surface light for the element is not turning off after the element cools, the switch that was in use at the time may need to be replaced. The Switch that controls the element, also controls the surface light. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Stephen, Thank you for your question. If the oven is not heating correctly, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. We hope this helps with the repair!

Hello Mike, thank you for your question. No, You cannot put a Frigidaire switch in a Whirlpool unit. For model YWEE730H0DS1, the correct switch for Right Front PS12347916. We hope this helps.