Y125 - Overview
Models starting with Y125
Click on the best match to narrow your results.
- Y125 MTD Tiller (MTD Tiller Model Y125 Parts)
- Y125 ( 21AK125G800 2015 ) Yard Machines Tiller (Tiller)
- Y12538B (1992) Husqvarna Lawn Tractor
- Y12542A (1993) Husqvarna Lawn Tractor
- Y12542D (1995) Husqvarna Lawn Tractor
- Y12542E (1999 And Before) Husqvarna Lawn Tractor
- Y12542G (1999 And Before) Husqvarna Lawn Tractor
- Y12592RBA (1999 And Before) Husqvarna Lawn Tractor
- Y125H38A (1992) Husqvarna Lawn Tractor
- Y125H42A (1995) Husqvarna Lawn Tractor
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Flange Wheel Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$11.29
In Stock
Lawn Mower Ring Clip
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$6.40
In Stock
Lawn Mower Washer
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$6.40
In Stock
Trimmer Carburetor
PartSelect #: PS9119300
Manufacturer #: 753-06190
A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, ...
$50.69
In Stock
Lawn Mower Hairpin Clip
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$6.40
In Stock
THROTTLE CABLE
PartSelect #: PS18475364
Manufacturer #: 753-06831
This is a genuine manufacturer-sourced replacement component which is specially designed for use with Bolens and Troy-Bilt tillers. The throttle cable is connected to the carburetor and it stops the e...
$18.41
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.40
In Stock
Carburetor Gasket
PartSelect #: PS9119051
Manufacturer #: 753-06253
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carbure...
$6.40
In Stock
Lawn Mower Screw
PartSelect #: PS9009676
Manufacturer #: 532137729
This is a genuine OEM replacement part used with many lawn tractor engines. The Craftsman screw (1/4-20 x 5/8) secures the cover to the riding mower deck housing. This hardened metal item is sold indi...
$6.40
In Stock
Lawn Mower Mandrel Spacer Washer
PartSelect #: PS9286886
Manufacturer #: 532187690
An OEM part sourced directly from the manufacturer, this part is sold individually. Washers help to spread the load, and prevent damage to the surface being fixed, or provide some sort of insulation ...
$7.04
In Stock
Clutch Asm Small
PartSelect #: PS9303676
Manufacturer #: 753-05860
This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engin...
$36.65
In Stock
Lawn Mower Mandrel Assembly
PartSelect #: PS9014379
Manufacturer #: 532130794
This is a genuine replacement part sourced directly from the original manufacturer. This assembly consists of metal parts and it is sold individually. This is the part that houses shaft that mower bl...
$68.86
In Stock
Common Symptoms of models starting with Y125
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Engine revs but trimmer head will not turn
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines o
... Read more
nto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read less
Parts Used:
-
john from SHARPSVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trimmer Would Not Start
The replacement of the carburetor, O-ring, and gasket was simple. I removed 2 screws that held the air cleaner and carburetor in place, swapped them out, and replaced the screws. What took longest was finding a piece of fuel line after breaking one of them. It was brittle after hanging in my garage for several years. I found some in my
... Read more
garage and replaced it. It took a few pulls to get it started, but ran very smooth.
Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues.
Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues.
Read less
Parts Used:
-
Ricardo from FORT WORTH, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Carburetor replacement
Removed 2 screws securing the air cleaner and carburetor to the engine using a T25 Torx driver. then removed the throttle cable from the carb.Then removed the o ring gasket from the engine and replaced with a new one and replaced the carb etc. Primed it and fired it up.Runs just like new.
Parts Used:
-
William from PALMETTO, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!