Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WT5170WH

WT5170WH (ABWEEUS) LG Washer - Overview

Get Parts and Repair Help for WT5170WH

If you know the washer repair part you need, you can browse the list of all parts on the WT5170WH, or you can search by name or part description. You can also find your part by where it is located on the WT5170WH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, ...



This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.



This genuine OEM wash plate, also known as a pulsator assembly, is a replacement part for your washing machine. Replacing this part can help solve issues with the agitator. To repl...








Hose Assembly,Drain


Switch Assembly,Sensor





Common Symptoms of the WT5170WH

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Three of the four pivot hangers broke while the washer was spinning.

  • Customer: Charles from Millington, TN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Once i got the parts I removed the top so I could get to the hangers. I removed the broken parts and replaced them with the replacement parts and rehung the tub and replaced the top. read more

Washer pulsator was coming loose during wash cycle.

  • Customer: Kristen from Safford, AZ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding... read more