Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WRT18G4AW4

WRT18G4AW4 Westinghouse Refrigerator - Overview

Get Parts and Repair Help for WRT18G4AW4

If you know the refrigerator repair part you need, you can browse the list of all parts on the WRT18G4AW4, or you can search by name or part description. You can also find your part by where it is located on the WRT18G4AW4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WRT18G4AW4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.50

Door Shelf Retainer Bar End Cap - Right Side

This replacement bar end cap can be used for a shelf in your freezer. The end cap is 4.25 inches long and 2.4 inches wide. You may need a flat blade screwdriver in order to pop out...

$3.42

Door Shelf Retainer Bar End Cap - Left Side

This is a replacement end cap for your freezer or refrigerator shelf retainer bar. You will need a flat blade screwdriver to complete this repair. To replace this part, remove the retainer bar by popping the end caps out of place. Use the screwdriver to pop out the individual end cap you are replacing. Secure the new one in place with the locking tabs and re-insert the retainer bar.

$24.10

Door Handle

This white handle can be used with both the freezer door and the fresh food door of many refrigerators. Note: As per the manufacturer, this handle includes the mounting block and s...

$29.60

Drawer Support Rail - Right Side

This drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced to ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic, is white in color, and measures 1 inch (L) x 5 inches (W) x 22 1/2 inches (H). NOTE: This part is sold separately from the left side drawer support rail.

$16.03

Refrigerator Door Shelf Retainer Bar - Cut to Fit

This door shelf retainer bar is a replacement part for your refrigerator. To replace this part, you may need a flat blade screwdriver to apply leverage. Pop out the end caps on the...

$77.42

Crisper Pan

This crisper pan, also known as a drawer, is a genuine OEM replacement part for your refrigerator. Installing this part is easy and requires no tools. Simply slide out the existing drawer and install the new one.

$13.80

Defrost Timer - 60Hz 120V

Defrost timers are part of the defrost circuit in your refrigerator and freezer. This timer cycles the defrost heater on and off. For every eight hours, the appliance timer will cy...

$60.48

Door Gasket - White

This fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air outside.

$58.06

Crisper Glass Shelf Insert

Glass only.

$29.96

Drawer Support Rail - Left Side

This drawer rail supports the left hand side of the sliding drawer.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

tenants had broken door brackets in fridge

  • Customer: Nancy from Pleasant Prairie, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 927 of 930 people found this instruction helpful
cut brackets to size and snapped them into place with the caps purchased. I will continue to use PartSelect for all my appliance repair needs. Not only did I receive my order within 2 days but the cost was over half of what I have been paying for the local parts store to order for me. Thank you PartsSelect. read more

Retainer bar had broken from overloading the door with water bottles.

  • Customer: Nancy L from Gainesville, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 731 of 736 people found this instruction helpful
It took longer to remove the retainer bar from the packaging than it did to install it in the fridge.

Both left and right end caps were pushed into their respective places on the retainer bar and then the whole thing was snapped into place on the door of the fridge.

Super easy! read more

Broken shelf-retainer bar and brackets

  • Customer: Paul from Oakdale, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 459 people found this instruction helpful
Put them together and (do this carefully, as they are light-duty plastic; the reason the originals failed) snapped them into place. Parts were factory-origninal, easy to figure out. Delivery time was exceptional, packaging great. read more